Superduty axles and ABS

[IndyB]

Hi guys! My first post here. I'm not new to Jeeps. I have a 98 a TJ with Chevy V8 swap that is CARB approved. Did all the work myself in the garage from ECU tuning, custom gauge cluster, efan, custom exhaust, axle gearing etc. Did it myself.

What I need help with is the ABS info with 05+ superduty axles. Anyone running this setup without any issues? What hubs/tone rings/sensors did you go with 05+ D60 and Sterling 10.5 combo?

Sponsored

 

[Escape.idiocracy]

Hi guys! My first post here. I'm not new to Jeeps. I have a 98 a TJ with Chevy V8 swap that is CARB approved. Did all the work myself in the garage from ECU tuning, custom gauge cluster, efan, custom exhaust, axle gearing etc. Did it myself.

What I need help with is the ABS info with 05+ superduty axles. Anyone running this setup without any issues? What hubs/tone rings/sensors did you go with 05+ D60 and Sterling 10.5 combo?

https://artecindustries.com/search?type=product&options[prefix]=last&q=Ton+rings

52 tooth tone rings. ???

 

[IndyB]

https://artecindustries.com/search?type=product&options[prefix]=last&q=Ton+rings

52 tooth tone rings. ???

These will not work. And they don't have any timeline on when the JL/JT ones will be available.

 

[Escape.idiocracy]

These will not work. And they don't have any timeline on when the JL/JT ones will be available.

You are spot on, sorry, I was going off their stuff when we built our JKU (right when JL’s came out, and they were one of the first to offer superduty swap brackets….. ) looks like this was something that was “coming soon” and years later is still not out.

https://www.jeepgladiatorforum.com/forum/threads/junk-yard-ford-1-ton-axle-swap.45482/page-3

This tread has what looks like two solutions. ???

 

[Bec]

I’m doing a swap with a Dana 60 and Sterling 10.5 on a gladiator. Used JScan to adjust tire size and gear ratio settings according to their Dana 60 swap calculations and so far I only have an ABS trouble code for incorrect wheel speed sensor installed in the front. Which are dodge ram wheel speed sensors. The rear has oem sensors with artec 60 tooth tone rings pressed onto the hubs.
Also, this is my first post here.

Sponsored