What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[OVRLND_G8R]

winch finally installed. Thinking about changing all the silver to black.

Sponsored

 

[sass JT]

Hardwired my radar detector in. Was tired of hanging wires.

 

[Weston.cain]

Put on my gladiator decals today which was stressful AF, still haven't worked out all the bubbles hoping they disappear in a couple of days. Tomorrow getting a spray in bedliner along with getting the sides under the rock rails lined as well.

 

[Jdyowa]

Put on my gladiator decals today which was stressful AF, still haven't worked out all the bubbles hoping they disappear in a couple of days. Tomorrow getting a spray in bedliner along with getting the sides under the rock rails lined as well.

You can use a.really small needle to pop them. Heat gun helps afterwards. But not needed

 

[z0lt3c]

Day #3 of ownership... Replaced the steel wheels with my JKU 18" Sahara Altitude wheels.

 

[NateKY]

Finally added some KC HiLites. Retail around $160 a pair and got them at Pep Boys in there clear all sale for $53 a pair.

 

[Buzzlb]

Ace is the rails!
Got‘me ON.

 

[FL Handle Guy]

I built it a hat rack. The index pin in the front locks into the rack so it wont slide around. I'll take some measurements and better photos once I put everything back on and do a simple write up.

DIY how to link

https://www.jeepgladiatorforum.com/forum/threads/hardtop-and-door-cart.29455/

 

[Gatorized]

Quite the rig! What keeps the freedom panels from falling off the sides? And do the doors just stand up on the bottom shelf?

 

[Seansmd]

I added some Rhino Grip Flex 1.5" to the Yakima basket for a shovel today...

Those rhino grip, can you lock them?

 

[Digger70]

I saved about $500 and bought an 'open box' bumper from Extreme Terrain. It came via UPS Freight and was not boxed or wrapped in plastic. Just had some scuffs and also had the bullbar and everything needed to install (including the D-ring shackles and winch plate). It is slightly bent. The left side of the bumper goes under the fender about an inch more than the other side but I don't care, I like it. It weighs about 80lbs. I had a similar bumper (Rampage Recovery front bumper) on my '14 JK Willys Wheeler but the bullbar on it was welded on. (Also I used zipties to mount the fog lights which were the Overland fog lights since I have the body color fender/AT tire package that uses the Overland bumper.)

 

[TheHops]

Nothing fancy, but I hopped out in to the rain to install my color matched GPCA grab handles today on all four doors. They fold flat, which is nice, so they won't be flopping around off road.

 

[RUTNUT]

Put a Rough Country bed cover on the gladiator and washed up my other 2 jeeps.

 

[cajun charlie]

Ace is the rails!
Got‘me ON.

Did these install under the factory rock rails?

 

[Tourenwagen]

Upgraded from 35's to 37's.

20x10 KMC KM235 Grenade Crawlers w 37" Nitto Ridge Grapplers and a 1,5" Teraflex front level kit.

Sponsored