Yes, if you want the background light you'll need to run it to a switched fuse, F52 is cigar lighter and what I used.I just got my Baja design squadron r pro in amber today. Can I run both of them on either the factory aux switch 3 or 4?
Yes, if you want the background light you'll need to run it to a switched fuse, F52 is cigar lighter and what I used.
From the lights, how many wires are in the harness, 2 or 3?The switch harness I got with the lights is only a 2 position switch, doesn’t say anything about a background light . Thanks for your reply.
From the lights, how many wires are in the harness, 2 or 3?
The background lights don't work off the switch. You have to tap a switched fuse.
On my BD light bar there was a third wire for this. Not running to their switch.
Okay, then that is one that is not back lit.the wires coming out of the lights only have 2 a ground and a power. So does the harness that plugs into them
I got the Baja Squadron Pro with the Baja Harness that has a switch, relay and fuse.
On the harness, I cut off the positive ring terminal off and crimped that with Aux 1 (in my case).
The negative, I unbolted a nut next to the battery, passenger side that had two other factory Ground cables on there. I unbolted the nut and put the ground there.
Then I tidied the harness next to the battery.
That's all you gotta do. I left the Baja rocker switch in the On position.
Btw lights are the f-ing bomb. Baja rules
Yes I left the Baja Harness Rocker switch in the ON position and then I control the lights via AUX 1 in the cabin. AUX 1 button gives power to the Baja Harness via AUX 1 wire that I crimped to the Baja Harness Positive (Red) Cable.Cool . So you to use the harness with relay and fuse , you have to leave the rocker switch with it and just leave it turned on and the aux switch will actually turn the lights on?
Yes I left the Baja Harness Rocker switch in the ON position and then I control the lights via AUX 1 in the cabin. AUX 1 button gives power to the Baja Harness via AUX 1 wire that I crimped to the Baja Harness Positive (Red) Cable.
Lights are absolutely killer and put OEM to shame. I went with the spots only. I don't get any glare on the hood as some others have said about hood mounted lights. They probably didn't have the Bajas
You don't need to ground to the battery. Anywhere on the body or frame that isn't coated in paint will do. If there are any screws into the body nearby, put the ground under that screw with a ring terminal.Ok thanks, so I can wire them together and just run the power wire to the aux #3 switch and ground to battery?
You don’t need the relay or anything. Wire the ground to a grounding point and the power to whichever Aux you chose. Done.Cool . So you to use the harness with relay and fuse , you have to leave the rocker switch with it and just leave it turned on and the aux switch will actually turn the lights on?