Sponsored

Recent content by peter dragon

  1. Bed rack, tonneau cover compatability

    3 is plenty for each side. i have lock nuts and washers underneath. no problems so far.
  2. Bed rack, tonneau cover compatability

    I used five sixteenths by 3 inch stainless steel carriage bolts and drill through the top of the bed. It doesn't attach to the cover at all it rests on the side flange of the cover
  3. Relocating my 2025 Willys

    That kind of sucks but thanks For the info. I guess I'm spoiled
  4. Relocating my 2025 Willys

    I'm moving from Payson AZ to the Williamsburg area of Virginia. Can anyone tell me of local gladiator groups, trail groups, best places to ride, best places to camp particularly in that area. I've hiked the Appalachian Trail so I know western Virginia fairly well around skyline. And I'm quite...
  5. Coolant filter setup ?

    I installed one on my 2001 Cherokee, the inline 6 is notorious for rust and filling up a radiator with it. They definitely do work. My coolant remains green! You'll want to do a good flush first and replace parts that are suspect. Plumbing parts from Home Depot or off Amazon. The Baldwin B5134...
  6. Auxiliary Water Tank made from PVC fence posts

    Actually the vent is open To relieve the vacuum. It's just 1/4 inch bulkhead fitting used in RO systems. You described it pretty well though. I've use these in my hydroponic system, cutting three inch holes for grow pots. But now that they have the holes in them, they're useless for anything else.
  7. Auxiliary Water Tank made from PVC fence posts

    I could always paint it black at some point or any other color (billboard anyone?) but I'm not looking for hot water as paint on vinyl won't age well. Its not intended to be pressurized, just gravity fed as wash water. To protect the vinyl surface, I'll keep it 303'd or cover it with sacrificial...
  8. Auxiliary Water Tank made from PVC fence posts

    The fence posts (sleeve) come in 3,4,5,6" from Home Depot and are solid vinyl, same as PVC pipe. There's others out there that are laminated vinyl. I used the square as its easy to secure to a flat surface like the T slot and tapping it is simple using bulkhead or RO fittings. Since it's not...
  9. Auxiliary Water Tank made from PVC fence posts

    My camping is usually only three or four nights and two gallons of wash water hasn't been quite enough. Added a 4 gallon auxiliary tank on the rack. Used a PVC fence post with caps, valve and an air vent. Adding a 4ft leader hose for filling. It's not really for potable water but it could be if...
  10. USB ports in Bed...

    #10 Is far too much that's the size of wire you hook up water heaters with
  11. What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

    I installed the fire extinguisher. Guess you never know when you're gonna need it. Wondering how many other folks have one as well. And are there any good stories that they've actually had to use one . I thought this was the best place for it since I would be in a hurry to get to it if I needed...
  12. Camping with your Gladiator

    I just installed a second one over the tailgate to shade the ice coolers. They were on sale on Amazon for $135, so I grabbed another. This is the smaller of the two as they make a bigger one but it was way too large for what I wanted. https://www.amazon.com/dp/B08ZS3Y1X7. The cover you see is a...
  13. How Much Did You Spend on Your Gladiator Today?

    The All-Top awnings were on sale on Amazon for $135. Installed another one on the back over the tailgate where I guess I'll keep the coolers out of the AZ sun. T slot extrusions would be the way to go but shipping for those is far too expensive. Had some mahogany that should last a long time...
  14. Camping with your Gladiator

    Camping on the Mogollon Rim north of Payson AZ. About 100 ft from the 700 ft drop so a good breeze most of the time. Campsites are unlimited up here, being the Coconino National Forest. I don't do fires, maybe charcoal if a steak is handy.
  15. Bed Rack Suggestions For Tonneau Cover

    The risers are 18" and I could have shortened it a bit and still had clearance. I didnt want a rollup as they are known to leak. Im not aware of any trifolds it wouldn't work with. I installed the MX4 then build a 2x3 wood frame as a pattern to order the extrusions precut. I suppose I couldn't...




Top