msujedi
Well-Known Member
No lift & 31s (red) vs 2" lift with 35s (black), right?Last photo shows stock Overland vs lifted Overland.
Sponsored
No lift & 31s (red) vs 2" lift with 35s (black), right?Last photo shows stock Overland vs lifted Overland.
Correct if the stock tires on an Overland are 31’s. I don’t know the size off the top of my head. But yes, stock (Red), lifted with 35’s (Black).No lift & 31s (red) vs 2" lift with 35s (black), right?
I've got over 1500 miles on it so far. I do get some slight rubbing when turning into a driveway at speed, haven't investigated exactly where it is contacting. I think these tires are a little wide for the stock wheels, and I notice a little more wandering on highway than with stock 33s. I ordered a set of Mopar beadlocks to give me a little wider wheel, and a little less backspacing for clearance. I should have them on next week.Now that you have had this set-up for a bit, how is it working out with articulation and rubbing? I assume you have a lift as well with the 37s? Any issues with the 37s on the 7.5 Wheels?
i wanna run it on 34.8'sWhy does everyone call 315/70/17's 35's? They are 34's.....
Lots of nice trucks in this thread. Cant wait to get mine and run it on 34's.
Size over size for BFG MT KM3s is 34.4 for the 315, 34.5 for the 35, Width is 12.7 on a 9.5 for the 315, 12.5 on a 10 for the 35. Both E rated. Weight both right around 74 lbs.Why does everyone call 315/70/17's 35's? They are 34's.....
Lots of nice trucks in this thread. Cant wait to get mine and run it on 34's.
So can anyone tell what wheels these are? I’m walking away from Black Rhino. Buddy of mine is on his second set in a year and the latest ones he is running went about 4 days before showing rust! Been thinking Method Grid MR309 but like the all gloss black look but not too thin if you know what I mean?!?!
Those wheels look like Fuel Recoils.So can anyone tell what wheels these are? I’m walking away from Black Rhino. Buddy of mine is on his second set in a year and the latest ones he is running went about 4 days before showing rust! Been thinking Method Grid MR309 but like the all gloss black look but not too thin if you know what I mean?!?!
Looks horrible..I would really like to see a Rubi with 2 inch lift and stock tires.
Thank you!Those wheels look like Fuel Recoils.
http://www.fueloffroad.com/wheel/7290/fuel-1-piece-wheels-recoil-d584/?finishID=12&lugs=5
You back on the grid yet, or enough at least to grab that height measurement? Thank you.Sorry Jeep Rigg! I have been off the grid for a few days but will get you exact measurements with the 35's tomorrow. You can add plus 1" for 37's but I will get you a good base measurement with Mopar lift and 35's.
Shouldn't be an issue in 2WD if you put the smaller tire on the front drivers side since it has the FAD on that side.How horrible is it to run 3-37" tires and one 35" tire when one of your 37" blows?
I thought i heard the tires trying to rotate at different rates wants to destroy differentials??
DOH, forgot about just 2wd and put it in the front. But if you're out in the wild and need 3 wheels to get home, ....anybody know if jeepguy's suggestion would work?Shouldn't be an issue in 2WD if you put the smaller tire on the front drivers side since it has the FAD on that side.
I am interested to know though, if you disconnect the power cable going to the FAD (and using your Tazer), put the jeep in 4wd and hit the lockers in order to limp out in 3 wheel drive, keeping the smaller tire free spinning on the FAD side.
I wonder if traction control would cause an issue...
i'll take the stock tires for my sport S when they upgrade.Looks horrible..