Official Gladiator Measurements Thread

[AJ-MJ]

What is the ground clearance for a stock Rubicon with 33s?
From ground to differential =
From ground to bottom of axle =
From ground to the lowest point on the shock mounts =

Sponsored

 

[AJ-MJ]

What is the distance from the rear of the wheel wells (where the wheel wells meet the floor) to the tailgate?

 

[steffen707]

What is the ground clearance for a stock Rubicon with 33s?
From ground to differential =
From ground to bottom of axle =
From ground to the lowest point on the shock mounts =

Now this thread is picking up steam. All these weird, maybe not weird measurements that curious minds desire!

 

[Slapping_Rabbits]

Ok, so the inside of the bed w/ tail closed is ~61in. Diagonally its ~76in, minus the distance you loose from the geometry of the tire. And with the tailgate down, its ~81in from the edge of the tail to inside of the bed.

Awesome! So I just might be able to make this work!

 

[bairdy380]

Can someone confirm the rampover - breakover angle on
33's - Stock
35's - Stock
Anything lifted and relative details
Cheers

 

[sbetts]

Can anyone give me the dimensions on the hardtop? Trying to arrange a storage solution. I’ve looked for this elsewhere on the forum and perhaps I’m just not coming across it? L/W/H. Thanks

 

[Steve97ag]

How about the length of the rock rails on the Rubi? Looking for side steps that'll fit!

 

[steffen707]

mopar crate is 23.75"x23.75"x29.25"

 

[2004blackwrx]

Hardtop size would be good. I would lime to build a top removal system as well while I wait in D status. Also curious if it would fit in the bed because an option to stay dry is nice since the weatherman sucks.

 

[steffen707]

Hardtop size would be good. I would lime to build a top removal system as well while I wait in D status. Also curious if it would fit in the bed because an option to stay dry is nice since the weatherman sucks.

I hear ya, but I would wait till you get yours. Measure twice cut once.

I suppose you could gather all the materials now, but don't do final cutting till it's in your garage,imho.

 

[TLife]

Does anyone know the height difference between the hard and soft top? Official height for a Rubicon is 76.1", curious if that's soft or hard top and what the difference is.

 

[steffen707]

Does anyone know the height difference between the hard and soft top? Official height for a Rubicon is 76.1", curious if that's soft or hard top and what the difference is.

I don't know the answer, but you can tell the support bars for the soft top stick up slightly higher than the hardtop does. interested to hear the answer.;

 

[GaryG]

Anybody have a measurement for ground to bottom of hitch for a stock Rubicon?

 

[Scottism]

I see all these outside dimension, what about inside ones? My dog is spoiled and likes to rest her head on the middle console while in the front seat. I'm going to try and force her into the back seat of the Gladiator when it comes but figured I'd build a platform to fill the gap between the so front and back seats she could still reach and put her the head on the middle console and be close to me.
So that being said what is the distance from the back of the cab (with seats folded down) to the back of the front seats (pushed all the way back)? Height of the folded down seat to the floorboards? And height of the back door opening from bottom to top?
Weird requests I know... Thanks!

 

[Kjm18]

Anybody have a measurement for ground to bottom of hitch for a stock Rubicon?

18.25"

Sponsored