Bed racks with cover?

[noodles]

Hi are there any bed racks that has a cover that goes over it to keep everything in the bed dry?

All the racks I've seen are just the rack frame where you can mount stuff like roto oaks etc.. But any that comes with a cover?

Or any available canopies for jt? Havnt see t much.

Regards

Sponsored

 

[19JL]

I’m working on building one that my Mopar tri-fold will work with.

 

[noodles]

I’m working on building one that my Mopar tri-fold will work with.

Yea I have the Mopar trifold too and most racks won't work with it... Disappointed.

 

[GlacierGladiator]

I had a custom rack made cause I believe there is only one rack that will work with the soft tonneau cover. Not a cheap route but you get what you want in the end.

 

[DiscoDino]

Which is the ONE that works with the OEM soft tonneau?

 

[Rubinator919]

Which is the ONE that works with the OEM soft tonneau?

KB Voodoo is the only one that I’m aware of:

https://www.kbvoodoo.com/shop/jeep-gladiator-hi-rise-crossbars-for-use-with-tonneau-covers

 

[DiscoDino]

KB Voodoo is the only one that I’m aware of:

https://www.kbvoodoo.com/shop/jeep-gladiator-hi-rise-crossbars-for-use-with-tonneau-covers

Thanks!

 

[spazzyfry123]

KB Voodoo is the only one that I’m aware of:

https://www.kbvoodoo.com/shop/jeep-gladiator-hi-rise-crossbars-for-use-with-tonneau-covers

I like it, but I'm disappointed in the 200 lb dynamic load rating - Especially since they say it is "perfect for roof top tents."

 

[Sespe]

I'm happy with it, but don't plan on adding a tent.

 

[Sixt7gt350]

A Jeeper (heavily modded YJ) co-worker wants to fabricate brackets like Voodoo for me.
(he's itching to fabricate stuff, after buying a bunch of equipment to fab a custom tranny crossmember with armor)
It doesn't look like Voodoo would have enough clearance for a tri-fold Tyger.

 

[Greg75]

18” aluminum Max-Modular/KBVoodoo with OEM roll-up tonneau.

 

[DiscoDino]

Looks great Greg! Question; the tonneau stays static right? as in you can't roll in out?

I'm think of fabbing my own...I have a couple of ideas that I will test...

 

[WhatExit?]

18” aluminum Max-Modular/KBVoodoo with OEM roll-up tonneau.

With those brackets and the height of the rack uprights, the bed cover should be able to be opened easily

 

[Mikegcny]

I’m working on building one that my Mopar tri-fold will work with.

Looking forward to seeing your finished work.

Did you draw up plans in advance?

 

[Greg75]

Looks great Greg! Question; the tonneau stays static right? as in you can't roll in out?

I'm think of fabbing my own...I have a couple of ideas that I will test...

With those brackets and the height of the rack uprights, the bed cover should be able to be opened easily

Yes and no. See my post linked below, which was in response to the same question.
What did you do TO your Gladiator today?

Sponsored