Search results

  1. Aftermarket speakers, Amp, and Pac Audio Amp Pro issues

    I was able to work through most of mine. Some caused by an amp. Some caused by alternator whine. I moved some wires, installed filters, and a new amp. Still have a little whine but it's minimal.
  2. My 2020 JTR Dual Color Gladiator Build

    Jp 1014 I think is the number
  3. My 2020 JTR Dual Color Gladiator Build

    I did a LOT of photoshopoing to get a color I liked. A lot of colors I wanted, I couldn't find. Like lime green. I wanted a metallic and gloss. Nobody makes it. The ones that were close, always out of stock. I chose between this and purple.
  4. My 2020 JTR Dual Color Gladiator Build

    Ya, the top would be tough. I'm still not sure about that part, but I really don't take the top off that much either. Honestly, I'll probabky out plugs on the lights so I can disconnect them easily, then just take the roll bar off to remove the top. I'm hoping someone comes out with a frame less...
  5. My 2020 JTR Dual Color Gladiator Build

    27" in the side panel length. 2" on the channel height
  6. My 2020 JTR Dual Color Gladiator Build

    I can measure it, but around 24"
  7. My 2020 JTR Dual Color Gladiator Build

    I can measure it for ya, but there was plant of space for any tonneau I've ever seen.
  8. PAC audio ap4-ch41r2 static noise issue

    Ya, I hear ya. The static drives me nuts. I am pretty sure it's not the PAC audio harness any more and it's my amp. I ran the amp off my cell phone and still had static. But who knows. I really don't wanna dump $2k into a new head unit but I agree that may be the only way.
  9. My 2020 JTR Dual Color Gladiator Build

    As far as I know it works with most top fit tonneau covers. I had to kinda rig the front mounts on mine until I can make longer rods but it was no big deal and it's actually working fine. I just switched the hand knobs and J hooks over to a large washer and nut for the time being. I dig the fan...
  10. My 2020 JTR Dual Color Gladiator Build

    It works fine, but will only fold the first fold. This is why I'm still torn 9n the roll bar but it's honestly not that hard to remove either. I'll most likely remove the roll bar for fall/winter when I use the bed more for hunting. And to be honest, I just mounted the lights and haven't hooked...
  11. My 2020 JTR Dual Color Gladiator Build

    Awesome! I had thought about doing my hood similar to that if Icouldn't pull the wrap off in one piece. I think Gobi would look good with sting gray
  12. My 2020 JTR Dual Color Gladiator Build

    I just followed the body line. It lined up great with the hood.
  13. My 2020 JTR Dual Color Gladiator Build

    It gets some looks, lol. Had a guy at the gas station taking pictures of it the other day. I was just trying to make it look cool.
  14. My 2020 JTR Dual Color Gladiator Build

    I DO!! I needed to get it closer to the windshield. I was using one ram suction mount, but ended up making this piece so I could use two and set it closer to the window.
  15. My 2020 JTR Dual Color Gladiator Build

    Had it just under a year. Done everything myself. Specs/mods: 2020 Rubicon, Granite Crystal Metallic 3.5" Clayton Offroad Overland lift with Fox 2.0 performance series shocks and stabilizer. 37"x12.5/17 Nexen Roadian MTs on Black Rhino Warlords Tyger Auto roll bar Factory bumpers with winch...
  16. Aftermarket speakers, Amp, and Pac Audio Amp Pro issues

    So this has been an absolute nightmare installing this system in my JTR. I am having issues with static at low volume using the Amp Pro. If you turn up the volume it isn't as bad, but I can't drive with the radio blasting all the time. I have been working with their tech support for a few weeks...
  17. Mounting GMRS antenna

    I mounted my GMRS and HAM on the front of the bed.
  18. PAC audio ap4-ch41r2 static noise issue

    Did you ever figure this out? I am having a static issue that sounds identical to yours.



Advertisement
Top