Search results

  1. Oil Drain Plug Size?

    I'm shopping for a Stahlbus oil drain valve for my 2021 JT with the Pentastar. My JT was ordered late April 2021 and delivered June 2021. Can anyone confirm the correct size oil drain plug? When I look it up, it isn't clear if it is an M14 x 1.5 or an M18 x 1.0:
  2. Connecticut FS: New Mopar Performance Air Filter from Mopar CAI Kit

    I have for sale a new Mopar Performance high-flow air filter that came with my Mopar cold air intake 77072433AC for the 3.6 engine. The filter has a part number on it (see picture), but I am unable to read it. I only removed the filter from the sealed bag to get the picture. $80 local pick up...
  3. Connecticut Sold: Hood Vent Parts from Mopar Cold Air Intake

    I have for sale the hood vent parts that came with my Mopar cold air intake 77072433AC. $100 local pick up in Windsor, CT. Here is what I've got: Outer plastic vent w/ 'door' (sealed in bag) Inner trim piece (sealed in bag) 4 nuts 4 rivets Adhesive kit 2 alcohol pads
  4. De-Chroming Rear Headrests

    I'm not sure if the chrome supports on the rear outboard headrests bother anyone else, but ... I don't like how they look through the rear window. So, I wrapped them with some 'coreless' paracord that I had on hand. Not wanting to remove the headrests right now, I ended up using a single wrap...
  5. Connecticut FS: Snow Tire / Wheel Package for B9 Audi A4 Allroad

    Just in case anyone out there has an Audi Allroad ... I have for sale a complete 17” snow tire & wheel package that was on my 2019 (B9 Chassis) Allroad. I traded in the car so I no longer need these. I absolutely loved this setup in the snow. The tires have excellent snow/ice grip while...
  6. DIY Ported Throttle Body?

    Has anyone ported & polished their own throttle body on the 3.6? I saw the pictures of the Fastman ported throttle body where he also removes part of the shaft. I would just be looking at smoothing out the leading edge and the slight step down to the machined bore. I have all the P&P tools ...
  7. Loose Weight on Rear Driveshaft

    So I was poking around under my Mojave and noticed quite a bit of weight added to the front section of the rear driveshaft. I've never seen this much weight spread out so much on a driveshaft. But, I noticed that one of the weights is loose. It rocks back & forth on the 2 spot welds holding...
  8. Mopar CAI - Individual Parts?

    I like the idea of the Mopar CAI, but only due to the larger opening of the air box cover and intake tube. I'm not a fan of 'high flow' air filters, so I would still use the stock paper filter. Also, having a Mojave, the additional hood opening is not applicable. So, does anyone have the part...
  9. Factory Alpine Premium Audio - MB Quart Dash / Soundbar Speakers?

    I have the Alpine Premium Audio with 8.4" screen. Like a lot of people, I'm not all that impressed with the sound quality. After reading up on the subject, my plan was to upgrade the dash corner speakers and the sound bar tweeters with the 3.5" Kenwood Excelon KFC-X3C speakers to brighten it...
  10. Connecticut Sold: Rubicon / Mojave Rock Rails For Sale - Only $25 !!

    I have a set of essentially new take-off rock rails that came on my 21 Mojave. They were removed at roughly 25 miles and within hours of taking delivery. Very carefully removed - these never touched the ground, they were put right into the box that my Overland side steps came in. Only $25 ...
  11. Unusual Noise at 40-50 mph

    I have a 2021 Gladiator Mojave that I've had for about a month. So far, I'm really liking it, but... It makes a noise that sounds like my HVAC fan motor is running at low speed, but I can only really hear it at about 40-50 mph. It is more of an 'electronic' sound like a motor running. My...
  12. Rokblokz Rear Mud Flap Mod

    I just got finished installing Rokblokz mud flaps on my new Mojave. I knew exactly what they looked like before ordering, but once they were installed, I really didn't like the 'hole' left in the rear flaps. So, I made filler pieces out of some mud flap material that I had left over from...
  13. Removing "Fuel Filler Housing"

    I'm trying to figure out how to remove the "Fuel Filler Housing" on my Gladiator - it's Item #2 in the sketch below. Has anyone removed this piece or does anyone have instructions from the FSM that they can share? Background: I'm preparing to have the typical body distortion around the fuel...
Top