Sponsored

Search results

  1. 3 inch cube fog-pattern light recommendations?

    Hey ya'll, back again for the collective wisdom of the forum. So any recommendations for a 3 inch cube light in a fog pattern? I'm currently working on improving the lighting setup for my JT. One thing I've never really liked about my truck are the set of LED cube lights that came with my...
  2. Rubicon Transfer Case Part Number?

    I was originally going to just message Benny @AllMoparParts.com , but I figured I may as well post this here so that the info is accessible to everyone. So I'm just going to copy paste my original message, hopefully these part numbers are useful. If anyone already happens to know this, please...
  3. Adding locker(s) to a Sport! Should I keep the factory LSD and add only a front locker, or full lockers all the way around?

    Hey y'all, it finally happened, I got stuck! I managed to bury the truck in a very silty/muddy river bed after failing to climb the bank on the other side. Luckily a friend of mine was with me and he went and threw a kinetic rope on the front of the truck and he was able to pull me free. (Pic...
  4. Body Armor 4x4 BOGO free rear bumper deal?

    Anyone here able to get this "deal" to work? Saw a post on Instagram, as well as their website advertising a free rear bumper when you buy the front. But I can't get that to appear in my cart, still showing full price. Wondering if the text was a mistake.
  5. Texas Sold: FREE - 2 Mopar Soft rolling Tonneau Covers.

    I have two (2) stock Mopar Soft Twill Tonneau Covers that I'm giving away for free to anyone that wants them. Located in El Paso, Texas. What's the catch? You'll need to repair/replace the support straps underneath them as they are torn. Otherwise the tonneau will flap around on the highway and...
  6. Texas Sold: For Sale: DV8 Gladiator Bed Sliders - $200

    I have a set of take off DV8 Gladiator Bed Sliders for sale, located in El Paso, Texas. Asking for $200. Might be able to ship, although these are pretty heavy. Sliders were installed January 2022 and Removed February 2023. Some small chips in the powder coat that will need to be hit with a...
  7. Texas Sold: For Sale: Go Rhino Trailline Gladiator Rear Bumper - $300

    I have a take off Gladiator Go Rhino Trailline full width rear bumper for sale, located in El Paso, Texas. Asking $300. Bumper was installed Oct 2021 and removed February 2023. Has scrapes/wear and tear in the powder coat that's not visible unless you're under the truck from dragging across...
  8. Steer smarts bearing dead after 10,000 miles.

    Just posting here for anyone running their steering re-enforcement so that they're aware, looks like the steer smarts system is suffering the same type of bearing failures that happen with the Synergy brace. Installed mine alongside my 37' Yokohama Geolanders at 37,000 miles, now at 47,000...
  9. Powder Coating questions.

    With the holidays behind us I've finally gotten around to looking for a shop to have my powder coating done on my black Friday bumper. Just wanted to ask a few questions from some of the folks around here who've had this sort of work done before. A big one would be cost, I figure this is going...
  10. Black Friday + Cyber Monday aftermath thread -- what did you buy your Gladiator? 🎁

    See title. I didn't see a topic on this and I was curious on what you guys spent your hard earned money on for your Jeeps! Pic's please! I ended up ordering a new @RebelOffRoad Summit rear bumper, plus some KC rear flood lights. Just need to find a good powder coating place so that they can...
  11. Thinking of trading my Sport for a Rubicon

    It's Friday and I've got a terrible idea floating around in my head, would like to know y'alls thoughts. Short version below. To long; Didn't Read: Return to stock built up Sport and trade for Rubicon. OR Swap Sport axles for UD44/Currie axles. (Or build up Sport axles) OR...
  12. Signs of a bad axle bearing? + mystery clunk when going over bumps. Help please.

    Was wondering if anyone has any advise on diagnosing a potential issue. TLDR: 37's might be killing carrier bearing: Truck specs: 2020 Gladiator Sport, ~45000 miles Non-Maxtow axles, stock knuckles, drag link, tie rods. Clayton Adjustable front track bar, Fox ATS stabilizer 2.5 inch Ready...
  13. Miss Red's build thread.

    I've decided to add a build thread of my (not so) little red Jeep! Seems like a good way to document all the things that I've done over the course of the year that I've owned her. As for the name, honestly I haven't settled on one yet, although Miss Red is a reference to a not so nice nickname...
  14. M.O.R.E Engine skid saved me from a dumb mistake today.

    So one of the benefits of my commute home is a large section of open desert/hills that I can cut through to not only save about 10 minutes (if I don't get distracted ha), but to also wind down after work. Well out here in this fine and dandy desert environment, it's been raining the last few...
  15. Texas Sold: Free Halogen Turn Signal Lights

    Free to a good home, one set of halogen turn signal lights. Took these off my Sport, my fender flares were trashed so I can't use these anyways. Lenses are in good shape, just dirty. Comes with harness, no bulbs. Harness was spliced by previous owner for a LED plate light that I removed, red...
  16. Texas Sold: Synergy Quick Disconnects + relocation brackets. ($150)

    Bought these from a forum member, ran them for two months then upgraded to Apex disconnects. I'll also throw in the extension/relocation brackets that Synergy sells separately. The disconnect holding brackets were spray painted flat black to blend in with the frame, and are chipped from use. The...
  17. Texas Sold: Four 35x12.50r17 Pro Comp XTreme MT2 Tires ($100)

    Upgraded to 37's, so I don't need these anymore, the tires are sitting at about 7/32's (6.5mm), put 20k on them, been stored in the garage since I took them off. 35x12.5r17, Load Range E. Located in El Paso TX, willing to meet within reasonable distance. Open to offers.
  18. Rear track bar options for 37's

    Hi guys, So after some digging in the forums, I decided to try my luck and see if the 37' Yokohama Geolander's would fit in the stock location. Well after getting the tire mounted and aired at 15 psi, I'm not quite sure that is the case. This is my current situation, I want to say this is less...
  19. Rugged Ridge Max Terrain Flares for Gladiator JT install/review.

    TLDR: Would recommend, rated 8.5/10. Some minor gripes about missing/non-preferred hardware, minor fit/ finish/assembly issues. Doing a write up on the Max Terrain flares for the Gladiator as it looks like they've become available since I last checked in March. Just a general walk through/log...
  20. Mopar soft rolling tonneau cover strap replacement

    So looks like one of the retaining/fastening loops on my soft rolling cover just let go: Anyone know where I can get a replacement, or has anyone here made an alternative? I'm honestly not sure if it provides any type of support for the rest of the cover, just seems like a retaining strap.


Top