Sponsored

Search results

  1. Where to mount Nilight pod light switch

    I think you're going to play hell finding a place to mount that type of switch. You need a flush mount spst like this switch on Amazon With this type of switch you can just use double-sided sticky tape and put it anywhere, like the little shelf under your steering column. There's nothing...
  2. Xtrusion Overland XTR1 with Bak Revolver "T-rail" configuration

    No problem with this version of mounting. It's strong and durable. I do rock crawl with this setup. The roller style cover can be used in conjunction whereas the trip-folds don't clear the rack supports.
  3. Wheeling Wednesday: Show us your Offroad Photos.

    Climbing a steep hill in norther Nevada.
  4. Lots of fluid coming from top of transmission

    This is where the oil/water cooler lives (the silver rectangle in the center). As you can probably tell, it's not trivial to replace.. The original, plastic cooler can crack for different reasons, including man-handling the oil filter cap. Many time though, it's the breakdown of the o-rings...
  5. Lots of fluid coming from top of transmission

    Don't forget that the o-ring goes into the 2nd groove on the cap, not the highest one.
  6. Over heating. (thanks in advance)

    If it was not overheating before you replaced the parts, then you did not get all of the air out of the cooling system. Bleed it again, with the heater on. Sometimes it takes 2 or 3 bleeds to get it all out. if it was overheating before, check compression on all cylinders for a blown head gasket.


Top