Search results

I've replaced the harness already with no change. I find it hard to believe that somehow I damaged the ground all the way through the second harness (from the sway bar link to the bumper).

What issues were you having? The reverse lights themselves work. The halo on my right tail light works. The halo on the left does not. If I swap the left light to the right side (and right to the left) the halo still doesn't work on the left. If I remove the Oracle lights entirely (disconnecting...

I've tried that but I'm garbage with a multimeter. I've watched several videos but still don't really understand how to check the pins. Can you point to anything that might give me a better idea on how to do that? FWIW, JScan seems to indicate there's an open ground, or some other grounding...

Yeah, I didn't realize that when I ordered. Oracle's website isn't clear at all that the harness includes enough wire for both lights. But the issue I'm having is beyond the Oracle harness. I can remove the Oracle harness entirely and plug both tail lights into the left side OEM harness and...

Can you explain what you mean by "ground in reverse wire"? I have these same lights and I'm having a problem with the left (drivers side) tail light not working. Specifically, the halo on the outside. If I plug the left side light into the right harness, it works fine. If I remove the Oracle...

Thanks for the reply! The reverse lights are working fine, just the single halo light on the left side is out.

First post here, been lurking for a bit. Purchased a 21 Gladiator back in November of 24. Been doing a few changes over the last few months. Most recently was a pair of Oracle LED backup lights to replace the rear bumper reflectors. All worked well after the replacement. I used the Oracle plug...

First post here, been lurking for a bit. Purchased a 21 Gladiator back in November of 24. Been doing a few changes over the last few months. Most recently was a pair of Oracle LED backup lights to replace the rear bumper reflectors. All worked well after the replacement. I used the Oracle plug...