Search results

thanks for the heads up. I was hoping it was just something like that instead of a bearing or some other catastrophic issue.

Yes, it has the proper fluid in the deaf as well.

I completely deleted everything and put a blank plate over the hole for the fad.

Here is a picture

Hello everyone, I just put RCV axles in my gladiator Rubicon. At the same time I replaced the knuckles with reid knuckles, the ball joints with Danatrac rebuildable ball joints, and Artech industries truss. I went with the one piece axle shaft to eliminate the fad. After doing these upgrades...

I just had theses lights come on for the first time yesterday after driving through a puddle on the road. I have a 2020 jt rubicon with 55,000 miles. Any ideas?

Hello everyone, does anyone know what the actual material is for the dana 44 front axle pumpkin and FAD? I have heard it was cast iron and cast steel. i am looking to add a truss to the axle to increase its strength. I am trying to find out if i can weld to the pumpkin and FAD or does it have...

2020 gladiator 4.5" lift Rock Krawler Lift 37"x12 Nitto All-Terain KMC Beadlocks Fox 3.0 shocks to level out and support the additional weight.

hello Membrain, apparently i was mistaken on the video, it was posted by Rock Krawler in this thread on page 17, Dec.19, 2019 i belive. this is what they posted. Yes, we found that Dana has had a pattern shift problem with the rear axle bosses and that any of the ones that aren't correct are...

I have marked all the bolts to see if anything moves. I did that when I found the control arms loose. so far, they have not moved. i look at them daily. I think i will let more air out too. with the increase in temperature here, I am sure they went back up.

Thanks for the reply Duke56. i went through all the bolts again and verified that they are torqued. I found the link walls on the cradle needed to be bent in to touch the sides of the arms then torqued. I think the company that did it did not look to see if they were tight against the arms. I...

I just finished installing my 4.5 Pro-x no limits with the 2.25 RRD shocks on my gladiator. I also installed kmc beadlocks with 37” Nitto Ridge Grapplers, currently running at 45lbs, and a PSC hydro assist steering kit. Everything went smoothly on the installation and I welded the 4-link cradle...