Search results

The oil cooler is leaking into the coolant, the same thing happened to me. They had to replace the oil filter housing assembly. Took a month to get parts.

No idea at this point as its already at the dealership. I spoke with them again and was told that the antifreeze is purple and that is why its so dark on the driveway.

Here is what it looks like, no smell to speak of, and it’s not oily, but I’ve never seen coolant that looked like this, and this is two days old and has not dried up

So I dropped my '22 off at the dealership for what I thought was an oil leak, they called back and said that it is actually a coolant leak and that a plastic tank and a hose need replacing. Now my question is why would a coolant leak look like it was oil? What is on my driveway is pitch black...

Spoke with the service rep today, the pump that blew up appears to be a new one based on the parts number. This means that a part that was put in May of 2024 lasted 15 months. This definitely does not inspire confidence in the recall parts or the motor in general. Fortunately all of this is...

I’ve already asked them to check it.

Not that I noticed.

The recall was completed about a year and a half ago. Again I don’t know if it was actually done since the stickers that were supposed to be added never were and I didn’t get the handouts about replacing the fuel filter.

So I was pulling my boat to the ramp on the first full day of my vacation when my JT just died. I initially thought maybe my batteries had died. After having it towed to the closest dealer they got back to me a couple of days later that the fuel pump had exploded. This was on 8/28 as of today...

So I got my Grimm plate installed and no extra bolts were necessary, they have added the extra bolts that are needed. I did have to grind down the inside of the bumper mounts in order to get my winch to fit, I did install a Zeon 12-s so your mileage may vary. The big issue I found was getting...

I've got the same thing on order, one thing to note I have seen people on youtube that the factory bolts may be to short with the plate so a trip to the hardware store may be in order.

Well I’m in Asheville and I won’t be caught without a winch again, one would have come in handy during the two day chainsaw fest getting off of the mountain. That and a solar powered battery pack for the two weeks without power.

OP take a look at the Garmin Powerswitch, I added one to mine and its completely blue tooth so no need for interior switches.

I have one of the two drawer systems in my truck and now I can't truck. It works great for hauling my surveying equipment but that's it. It is to hard to remove if I want to use the bed for anything else.

How well do cell phone boosters actually work? Do they work with data? I need one for those occasions that I am out of service so i can bring in GPS corrections while doing land surveys.

Here is my diesel Rubi with the AEV 2.5” lift sitting on 37” ko2’s.

I can just pull the lid off. Worst case scenario I may have to disconnect some things.

So I finally decided to go with a Garmin PowerSwitch to control everything when I get ready to install. I installed the PowerSwitch using a Powertray universal mount. In order to mount the tray I made a couple of brackets out of aluminum flat bar that I bolted to the fuse box lid. If anyone has...

Hello all, I am looking to add auxiliary lighting to my 2022 diesel gladiator. I am looking at the Garmin power switch, S pod or a switch pros. What is everyone's opinions on these and do you have any suggestions about mounting one on a diesel.