Sponsored

Search results

  1. Do fogs function as cornering lights?

    lol
  2. Can the Service Transmission warning be disconnected?

    I recall seeing people altering the tire size In the settings/programming, even if they had the stock tires. The logic being that this alters the math the cpu is doing to “determine that slippage is happening” and reduces/eliminates the message occurrence.
  3. Has any one tried this tailgate seal

    I have a full bed rug in my bed: it’s one piece that lays in the bed and extends onto the tailgate so that when the tailgate closes, it’s seals along the bottom edge completely. For the vertical parts of the bed opening, I used this product from Amazon. Together, the bed rug and the foam seal...
  4. Auto start message will not disappear.

    I don’t know too much about the Genesis system, but I imagine 1 or both of those batteries look like the aux to truck’s computer. If the age/voltage of the genesis batteries is getting to a point where they can’t maintain >12.4v, the truck could be interpreting that as “voltage is too low during...
  5. Issues with CarPlay after upgrading to iPhone 17PM and ios 26.1

    Sounds like your center console usb2 used to work, but now doesn’t, so not sure if this applies (unless just coincidence) but there were reports of the center console usb being flaky. I wanted to use the center console usb for my wireless CarPlay, but was experiencing may dropped connections...
  6. Installed a winch on my stock (plastic) Rubicon bumper - DIY writeup

    Looks like you could use a link to this edge trim if you wanted to clean up the appearance of the cut in the plastic. I used this myself and it’s been on for 3 years now https://a.co/d/8kLXPzF
  7. New TSB solution for Pentastar trouble codes, rough idle, and noise

    On a serious note: there are common reports of some dealer techs not being very good (or just plain too rushed) and causing more harm during the “repair” or forgetting to tighten important bits. Many would rather avoid any interaction with the dealer service department, even if it’s free.
  8. New TSB solution for Pentastar trouble codes, rough idle, and noise

    It sucks to be so jaded: every time I see a report of a manufacturer claiming to have definitively identified the source of an issue, my eye roll is nearly uncontrollable and I find my right hand making a wanking gesture in the air.
  9. Post Aux Battery Delete Issues

    OP, you don’t mention what method you’re using to disable AutoStart. You taped off the negative cable and pulled F42. That doesn’t prevent the start stop system from working. If you’re still allowing the start stop to activate, but only with the main battery in the loop, you would get a system...
  10. Simultaneously flashing turn signal lights - why?

    I don’t have keyless entry on my jeep, but in my Toyota I’ve definitely pressed the “lock” button on my key fob by accident before while in the vehicle and it was running. The car locks the doors for a sec, and then unlocks them, accompanied by the turn signals flashing (like a regular...
  11. Truck Died Last Night on a Main Thoroughfare, replacing batteries in 2 hrs or so, what may be needed? (Details in thread)

    The IBS monitors the flow of energy from and to the battery, so the idea is you don’t want to backdoor juice into the current/existing battery that the IBS is not aware of. My understanding is that this concern is preserved even if you delete the AUX. Trickle charge on top of the IBS. Just as...
  12. Truck Died Last Night on a Main Thoroughfare, replacing batteries in 2 hrs or so, what may be needed? (Details in thread)

    Maybe that was not clear in the thread: you don’t need to separate the batteries to trickle charge them (heck I’m doing mine through the trailer plug when not driving much), it charges both batteries at the same time. If you really wanted to charge each individually OR if you brought home a new...
  13. Truck Died Last Night on a Main Thoroughfare, replacing batteries in 2 hrs or so, what may be needed? (Details in thread)

    If you fully charged your batteries using your trickle charger, those voltages might be fine: since the alternator output is variable depending on the needs of the system, why would it run at 14.7V when the battery is reporting fully charged? I.e., when I use my charger for a few days before...
  14. NEED HELP FAST !!!!!

    Hardly a “need help fast !!!” post. Those are typically folks stuck with a mechanical issue in remote area or away from home, not someone looking to buy a vehicle, which by its nature is a slow process.
  15. Off Road tire repair

    Maybe some emergency replacement tire valves as well? https://a.co/d/bzBeSAg
  16. AEV Jack Base Slid Out From Under While Jacked

    This is what I use/carry https://www.harborfreight.com/automotive/jacks-jack-stands/off-road/3-ton-off-road-jack-59136.html Plus Jack Boss Jack Pad Universal... https://www.amazon.com/dp/B095S3MCJ7?ref=ppx_pop_mob_ap_share Many people like a bottle jack for smaller space used in the bed, but I...
  17. AEV Jack Base Slid Out From Under While Jacked

    The floor looks pretty smooth/slick. Prob wouldn’t take much of being off center for it to want to scoot under all that weight. But in general, the set up you have pictured gives me anxiety. Personally wouldn’t count on that in any situation. Factory jack is not great, and that base would be...
  18. Aux Battery Problems

    I’ll add that I am not trying to be difficult, but as an owner of a 22 with oem batteries, the neg+f42 aux delete at the time of new main purchase is on my own radar in the near future. Beyond being careful with those neg cables and taking off the correct one for your model year, should a...
  19. Aux Battery Problems

    So partly as troubleshooting one’s own technique and part to save others the same headache in the future: what are a couple of seemingly innocuous things that one could theoretically (but plausibly) do with a disconnected pair of neg cables and an ibs that might cause these issues we’re seeing...
  20. Aux Battery Problems

    Right, I get that working on aux replacement/physical removal can blow the z array fuses. But in this case the OP was just doing the remove aux neg+f42 removal route. And yet we’ve ended up with “check your N fuses”. I was having trouble visualizing how the z array would get blown by ONLY doing...




Top