Search results

  1. Gladiator Glamour Shots

    A few from the past year...
  2. Flush Mount LED Tail Lights for Jeep JT | Group Buy Pre-Order

    Appreciate the feedback/response Rachel, will look forward to the pending video...and as a side note, I don't have any plans of cancelling my (pre) order, been looking forward to this option for quite some time!
  3. Flush Mount LED Tail Lights for Jeep JT | Group Buy Pre-Order

    Already placed my order, but now am slightly concerned based on a picture posted in the other "Flush Mount Light" forum post... Can you (@ORACLElights) confirm the brake vs running vs turn signal light set-up? The concern stems from the minimal amount of brake light coverage/illumination...
  4. GATOR-19...The JT Pandemic

    Thanks! The Flex Era 3s are nice little lights...for the size of them, they put out a decent beam/pattern (I am running them as spots). I had not had the opportunity to see them in person prior to ordering - but I feel the advantage is they are more unique in their size/orientation/look (a...
  5. GATOR-19...The JT Pandemic

    The new projector did fix my issue with the Super7s. One of the actuators was sticking so it wasn't switching from low to high...swapped it out and haven't had a problem since. I can't comment on issues with being dim or flickering, as I haven't had any problems such as that...hopefully you...
  6. GATOR-19...The JT Pandemic

    Haven't posted any pictures in quite a while...and have done a few upgrades along with a trip from WI to ID, and back. Added KC Hilites Flex Era 3 lights, and moved the Slimlite LEDs to the bumper with the Flex 3s. Resolved the high beam issue with Headlight Revolution (they were good to work...
  7. GATOR Gladiator JT Club

    Been a while since I've dropped a pic of my Gator...
  8. SHOW ME YOUR WHEELS!

    I like them a lot, so far...had them for a little over a year (bought for my JKU), so I've put them thru all seasons here in WI. I have not had any issues with lack of traction, in any conditions, as of yet. While they are not as aggressive as the Ridge Grapplers, I (personally) feel they are...
  9. Auxiliary Driving Lights

    That's how I have one set of lights/spots set-up...connected a relay to AUX 1 and a high beam power wire. So I need to have AUX 1 on, as well as my high beams, in order for those lights to power on...As you said, if I have the lights on cruising down the backroads, and another car pops around...
  10. Led off Road lights review

    They aren't as rock solid as a 3 point mounting solution, and could stand to be a thicker steel, but up until last week I was running 6" KC Slimlite LEDs (which are decently heavy) and they didn't seem to vibrate when going down a decently smooth road...if you hit a good bump with a heavy light...
  11. Led off Road lights review

    Those are the same mounts I bought, and run...I've had them since June, and the only issue thus far has been some surface rust on the supplied bolt. So if anything, a replacement machine screw or bolt would take care of the only downfall I've come across for this "budget" mount.
  12. New JT Gladiator Steering Issue TSB 08-074-20 (for "Improved Steering Feel")

    I would like to thank this forum for the continued information being available to myself (and everyone else), as the TSB posted here sure made setting up an appt. for the hopeful/potential fix very easy...in my case. I have always had some concerns with my local dealer based on other people's...
  13. Jeep Gladiator - Customized 2020 Launch Edition - What is it worth?

    https://www.jeepgladiatorforum.com/forum/threads/highly-customized-gladiator-rubicon-launch-edition-worth-120k.32138/
  14. Giveaway of the Month - August 2020 - Your Choice of a Frame-Built Front Bumper

    I could REALLY use some MetalCloak in my life, especially a front bumper to get it started...The 2400 would be a great base! https://metalcloak.com/frame-built-bumper-2400-jl-wrangler.html
  15. Rubicon suspension question

    Yea, if a person weren't replacing the shocks with the Rubi's (which is what I also did like you're planning to do), they would only need to disconnect the lower shock mount from the axle and leave the top alone. Just take your time and give it a shot, I'm betting you'll be fine...but yes, an...
  16. Rubicon suspension question

    It is rather simple/straight forward, and once you jump into it you will likely realize it's nothing to be scared of...although with you running a 2.5" spacer up front, it might require a little extra force/prying. The following is what I did: Jack up the front end about as high as I could and...
  17. Rubicon suspension question

    Sport S Max Tow here...presently running the Rubi shocks and front springs with the 1.0" spacer installed from the 1.5" Teraflex level. My truck (others may vary) is running almost dead level (within about 1/4" or so. The front Rubi springs brought the nose of the truck up about 3/4". So with...
  18. Rubicon take off suspension, is it worth it?

    I recently swapped out the Sport S Max Tow shocks and front springs for Rubi takeoffs, in my opinion it is worth it. As mentioned above, I believe the ride is a little smoother, as if it "floats" over rough road a little better...and I'm not talking about the wandering that can be attributed to...
  19. GATOR Gladiator JT Club

    Hardly ever the same color from day to day, angle to angle...and I love that!
  20. Gladiator sport S questions - Getting ready to buy

    All max tow trucks (now) come with 4.10 gears and "trac lok" rear axles. Some of the early model 2020 builds did not include the trac lok...so that might be what you are looking at. If a truck does not have the 4.10 gearing, it is not a max tow, it would be the standard tow package. For...



Advertisement
Top