Search results

NEW PRODUCT! JEEP JL / GLADIATOR UNDERHOOD PLATFORM ACCESSORY PLATE. This first test batch is in raw aluminum and 15% off! Jeep JL / Gladiator UnderHood Platform Accessory Plate. This is our largest platform for mounting electrical accessories such as fuse blocks, fuses, bus bars, DC to DC...

Our only sale of the year! BLACK FRIDAY SALE! NOW THRU CYBER MONDAY - 10% OFF, USE CODE BF2025 813fabrication.com

Designed to fit the Jeep Gladiator rear bumper reflector insert area. The air coupler / rock light plate is made of 3.2mm / .125" powder coated aluminum. We recommend the ARB JIC-4 air coupler for the cleanest install. I have a version with or without the Baja Designs mounting location. The...

Designed to mount the ARB Twin / Single Brushless Compressors, the ARB Classic Single and most ViAir Compressors. The mount DOES NOT work with the ARB Classic Twin Compressor. There is not enough height for the Classic Twin to fit. The compressor mounts above the spare tire cross member on the...

Several people noticed the spigot I added to my RotopaX Water Container. They asked if I made a kit, so I decided to put some together for those that are interested. The kit comes with stainless steel spigot, stainless steel cap, Delrin spacer and gasket grade cork gasket. It is not a unique...

SAVE 10% Now Thru Cyber Monday! Use Code "SAVE10" Onboard Air Mounts, MOLLE Panels, Underseat Storage, Alu-Cab Accessories, Underhood Electrical Mounts and lots more! 813fabrication.com

Our Joolca 12V Pump Mounting Bracket may be helpful for your off-grid / overlanding setup. Designed to mount the Joolca 12V pump to any flat surface. The mounting holes match with our Water Tank and Side Mount MOLLE panels if you choose to use those for mounting your 12v pump...

FOR SALE! Alu-Cab Canopy Camper for Jeep Gladiator (other fit kits can also work). I pulled what parts I plan to reuse on the new MOD Camper. I am leaving the Redarc Redvision Rogue setup since it is so well integrated in the camper. The camper should be available in about a week! Here is what...

Something new I have been working on this week. A simple solution to help carry extra fuel or water. It can be mounted to any flush surface, such as bed racks, campers with extrusion rails, truck beds, truck rails, trailers, walls, etc. The mount can be oriented horizontally or vertically...

I thought I would share some customer install photos of our Gladiator compressor mounts. If you are in need of a mount for an ARB twin or single compressor, a ViAir compressor or even some of the 3rd tier compressors, I can most likely help get you set up. I have several options for Under the...

Our Alu-Cab Aluminum Table Interior Mounting Kit is now available! You can mount your Alu-Cab aluminum table under the bed frame inside the camper to keep it out of the elements. You could also use the mount on any other flat surface if you chose to use it for other brand campers. 813fabrication.com

Our Alu-Cab Canopy Camper Upper Rear Accessory Brackets are now available! A great use of unused space for tools, shovels, jacks, fishing poles or tractions boards. You can mount just the base brackets or add our traction board adapter plates. Made from black texture powder coated 1/8” stainless...

No code needed, all products are 10% off now through 11:59pm on Cyber Monday! Compressor mounts, accessory mounts, MOLLE panels, etc. https://www.813fabrication.com/

Our new Stainless Steel Bed Rail Mounting Plates are now available. Designed to fit most bed rails and can be adjusted depending on what rubber bump stops are used. Offered in long and short versions to work with wheel wells. The hole pattern matches with that of the RotoPaX Deluxe mount. Made...

Our new compressor mount for the Gladiator that fits behind the rear driver seat is now available! This mount is specifically for the ViAir VMS 400 tankless system. This mount is very similar to our ARB twin/single Compressor mount. The VMS system includes everything you need for your onboard...

More new Packout panels! Available now on the website. This is a 3-piece system designed for the inside side door of the @alucab Canopy Camper. The panels are flat so they are not limited to only the Alu-Cab Canopy Camper. With the use of spacers you could mount these panels on most any flat...

Our new BedSide PACKOUT/MOLLE panel is now available. Designed to hold a compact PACKOUT organizer (two is you keep the weight to a minimum). The panel also has a small MOLLE area as well as a slotted area for items such as an Element fire extinguisher. Made from 1/8” aluminum with texture black...

Has anyone seen the Dobinsons springs rust this bad after very little driving and time. Attached are photos of the front springs after less than a year on the truck and less than 15k miles. The rear springs are rusting as well. I have only driven in the Winter weather 4-5 times and sprayed the...

NOW AVAILABLE! We now have NOCO AC Port Plug inserts available to fit the 4xe Cowl Panels. These are 3D printed to order. We also have “4xAIR” inserts available with air coupler only or air coupler / rocker switch options. https://www.813fabrication.com/product-page/noco-insert-for-4xe-cowl-panel

I've been seeing many DIY setups and a few retail kits now for the 4xe cowl air compressor conversions. I put together a simple DIY kit for those that are looking to do this type of mod. Our "4xAIR" insert is 3D printed for a quick and simple cowl modification and it works great with our under...