Search results

I see everyone with smaller propane tanks but I wanted more propane. I got a 30lb tank and was trying to figure out how to transport it securely. When I had the 20lb it would usually vibrate itself loose and wasn’t really secure. I ordered a wall mount and a base. The mount is secured to the...

I see these only came out last year I think. I’ve burnt up my brakes going down steep grades with all my camping gear. Therefore I’m thinking to do an upgrade. I’ve debated over and over on the Teraflex Delta but then I saw the Baer’s. Says 14” rotors and uses same calipers.

If anyone in NorCal has a damage side panel let me know. I want to convert one of my glass panels to steel. So if your glass is broken I want that one 👍

Made a pass through just need a couple more things to finish sealing it from rain and snow

I’ve seen videos on removing battery neg cable from main battery. But if I’m correct the newer models have the thicker and thinner cable swapped locations? So the thinner on my 2021 with prod date of 12/20 has the thinner attached with the L bracket. And id rather not lose that bracket since I...

What I’m working with…. Gladiator with RSI SmartCap and Frontrunner rack. https://wolfbox.com/?ref=nficeybp First off, mirror and camera is a pretty sweet deal. BUT you need to order more to make this a seamless install. They don’t have a mirror bracket that comes with our Jeep #179 mount. So...

I wasnt sure if they would fit but I got the HookeRoad half rack above the cab. And was able to fit both panels. I had to make extensions to reach the crossbars. I still need to finesse the mounts to fix my head mentally not liking their not centered yet. but the slots in the cross bar are...

My setup in the bed had me wanting to put fridge at the rear seat since I sleep in the bed when I go camping. Didn’t take long at all. Maybe less than 8 working hours just a lot of back and forth checking each fitment. Only had to make one actual wood cut and fit on the first try.

My buddy bought some property so we went looking to see what’s up in the hills. Lots of deer but they were all small females.

I’ve been asked about the plate I made. I was waiting until I had spacers made instead of stacking washers. I took the factory bolt and went to Lowe’s for a longer one of same pitch, sorry I forgot the specs. Mount can be placed on driver or passenger side. Mount is not drilled since I’m not...

No longer available

Just posting this to see who's down to roll out there I post on IG a lot @svcwelds , and figured why not post on here and see if we can get a little meet and greet on here. They open at 10am and serve brunch til 12pm but serve food and drinks all day ofcourse.

I tried mounting in many places others have but I just didn’t like it? So I decided to make a simple basic mount. Two sided tape the factory bracket to the plate I made. Will add Velcro felt to other side of plate to hold onto center console to eliminate any vibration. No kinks to wires and I...

Updated listing. Tires were dismounted $2000 set of 5 wheels, no tpms

Ordered 37s so these are coming off next week. Pick up in Vacaville, CA. Date code 10th week of 23 Only 800 street miles , spare is new. $1400 for the set, cash or PayPal if you cover the fees.

Just installed the @Metalcloak gutz delete kit on my Wrangler. I only trimmed the fenders and didn’t do a full chop. Light is plug and play, no issues going from factory halogen to these LEDs. I didn’t change any settings with the Tazer. I have the other chop kit on my Gladiator and have issues...

Delete

I picked up another Jeep, a JL, and decided to build my own front bumper. Took some trial and error but I’m happy with the final. I used 1/8” since it’s not winch capable but with a winch plate behind I could always edit the top plate and face to clear a winch. Anyways let me know what you all...

I purposely made sure not to get the LED light package on my JL since I took pretty much off all of them from my JT. I had plans to go all @Diode Dynamics and can’t wait to get these ELITE MAX headlamps installed. I’ll do some side by side comparisons too against factory halogen and factory LED.

Installing the @Metalcloak skids. I didn’t have to drill the frame as mentioned in the instructions for the driver’s side. But I’m running Nemesis inner front liners so I’m having to wrestle at the motor mount bolts for the oil pan skid plate. I needed more extensions lol so I decided to just...