Has anyone replaced theirs? Mine has a melted connector for the heated steering wheel, I may be able to get it apart but if the scm gets damaged I may have to replace it. Long out of warranty so this is a diy.
Recently on my '20 JT the TPMS stopped working on the driver's side, thought it might be senders in the wheels but when I X rotated the tires the TPMS problem didn't follow the wheels, the senders are reading fine on the passenger side still. Anyone seen this problem, assume there is some type...
Been using FF since I got my JT 2.5 years ago, stuff has worked great no corrosion underneath or on any hardware but I noticed recently that some of the areas on the frame and suspension the original paint had been blasted off by sand or whatever from having 35k miles, picked up spray can of FF...
Have had my little lift on my Sport JT for over 2 years, 1.5" Daystar front spacers, 340 and 343 springs, Daystar lower spring perches, Daystar rear .75" spacers, Mopar lower control arms, Rubicon Fox shocks, and Kenda Clever 35x10.5 tires on AEV Savegre wheels. Handling has been fine, okay...
Towed my 19’ Four Winns about 120 miles today from MA to ME. Boat and trailer is around 3k lbs, had full tank of fuel, 3 adults, 2 dogs and a bunch of stuff and tools in the bed. Temp was 80 out, had cruise set at 68, oil ran between 215 to 220, trans and coolant ran between 198 and 205, got...
Heated steering wheel stopped working, light comes on for 2-3 seconds then goes off, read it is not that uncommon in JL forum, apparently the wheel needs to be replaced, JT is 1.5 years old with 26k miles, dread having to take it to the dealer. First time for repairs.
Saw this on the JL forum may help someone, issue with harness melting against the exhaust.
https://www.jlwranglerforums.com/forum/threads/diesel-fatal-flaw.81416/
Made some plates to replace the bumper reflectors and mount some small led utility lights. Made a cardboard template, cut plates from .125 aluminum with a jig saw, painted the back black, covered the part that would show through the bumper with reflective safety tape. Mounted the small utility...
Anyone running these? Pretty much decided these are the wheels I want for the offset and I have had AEV wheels on other Jeeps. Assume the oem tpms fits without issue.
Finally got a around to installing Rubicon Express shock extensions and Daystar front lower spring correction pads. I have 340 and 343 front springs with Daystar 1.5” spacers, Rubicon shocks, sits about 2.5” higher than stock. The RE shock extensions are very nice quality, powder coated and...
Launch edition wheels with Falken A/Ts 285/70/17s 9k miles, 15/32 tread on tires. Mint no marks on wheels, no plugs or gouges in tires. Included TPMS, bought them and was going to put other tires on them but not worth the hassle. Drove on them for 500 miles or so, perfect no vibration, TPMS...
Wanted to mount some LED lights on a cowl mount, tried a couple different cowl mounts but really like the Mopar ones as the bolts and spacers are perfect for the unique way they hold on the cowl they are also very nicely powder coated. Mounted up a pair of knock off LED lights on them and used...
Is there an OEM black lug nut? I tried some aftermarket spline nuts and functionally they where fine but they are smaller diameter and do not fill the opening in the wheel as well as the OEM.
Pretty much finished the suspension work on my sport s max tow. Happy with it.
I installed Daystar 1.5” front spacers and .75” rear spacers. Front springs from a Rubicon LE, 340 and 343. Front and rear Rubicon Fox shocks. Mopar lower control arms from the Mopar 2” lift, you can buy them new for...