Search results

I call it my Jeep. I need a small truck bed. It fits me perfectly. 2021 Red 80th Anniversary.

'21 80th Anniversary with stock running boards and weathertech front only mud flaps. Stock wheels with Wildpeak At3 255/70r18 tires. Almost zero side spray. Lots of tar bleed through country roads around here and a couple of spots will get on the sides but that's it. It looks good to me.

The more balanced both exhaust sides are the better. Sometimes you can't do it because of size constraints.

Make sure they are adjusted right. My 2020 Overland and current 2021 80th Anniversary were both adjusted waaaaaaaaay too high. After adjusting them down no problems at all. Wife had 2017 JKU, same for it, aimed waaaaay too high.

Funny how my oil changes are in time with the JEEP maintenance report I get from JEEP. It reads every time you reset the OCI monitor. It reads tire pressure and other things I'm sure. Either way "they" have it on record. One thing I've done in the past is let them do a oil / oil filter change...

Take 5 gal gas can with you and drive until it runs out. Now you know.

IDK if this will help. Wife had a 2017 JKU with wind noise. Dealer had techs and the body shop work on with no success. They finally got the water leak "guy" to look at it. He had a stethoscope with a long tube. He found the leak. The body had not been formed correctly around the "bottom" of...

Do you sit on your wallet? I was getting same thing you describe, took wallet out when driving, no more leg pain.

So OVERLORD..........................you call yours a nozzle. Interesting. I'm pretty sure the "instructions" are for millennials. . . . . Because if you need instructions to put gas in your gas tank, you "do not" need to be driving.

Replaced the Bridgestone Dueler A/T's with Falken Wildpeak at3w's. Stayed with the stock size 255/70r18. Interesting the mounted Wildpeaks were a full 1 inch taller the the mounted Bridgestone's.

The O-ring on the cap is what holds the cap from unscrewing. I painted a mark on the cap and housing. I screw the cap back on to the mark. You don't torque plastic. Dumbest thing I've ever heard of.

Unless you go up at least 2 points on compression (10 to 1 to 12 to 1) OR go up on intake manifold pressure (turbo or super charger) you don't need Super Volt Coil's. OEM is the best for stock engines.

After cleaning windshield real good I spray on Lucas Slick Mist. Let it dry good and buff off with clean micro fiber cloth. I spray entire front end down in between washings. Spray on wipe it in and let haze over. Wipe off with micro fiber cloth. Good stuff!!!

NO disrespect to anybody. But.............. Those are the ugliest folded back tops I have ever seen. Saw one in person and had to go around, get out and get a close up view. COME ON after market make a soft top that looks good. PLEASE!!!!!!!

Isn't that a speaker hanging on the pole on right side of the Jeep???

Camber is fixed on Jeep solid front axles. I believe you are talking about caster. After you lift a Jeep front axle you "should" have it checked for alignment. If you don't have enough caster you can add the longer adjustable lower control arms. "Camber" is how much the tire leans into the...

Does DT take trade-ins???

Pull the seats and carpet out so they can dry and air out. Build a garage to keep your topless JEEP in.

You want the headlight cutoff beam to be 1.5" "lower" than the center of the headlights at 25 FEET from JEEP headlight to door/wall. 2017 4 door, 2020 Gladiator and current 2021 Gladiator all have been aimed waaaaaay too high to the point you could hardly tell when the brights were on. The 4...

Is there a way to unhook the "little" battery without setting off 105 codes??? I find the ESS funny for a JEEP that people put "37's on, 4:88's in and lift it to further make it less AERO dynamic."