Search results

Like others have said, looks like a communications issue. I would go into device manager, look for the entry for the tazer and delete it. Then disconnect the tazer, reboot pc and then reconnect. This way your PC should rediscover the device and reinstall it. If that doesn’t work, if you know...

So food for thought…. Have you added up all the device amps your going to run on this circuit? Keep in mind that this is 12v and not 24v so doing that long of a run using 12v you will have to deal with voltage drop and additional heat generated with that 6awg cable. You need to do your...

I wanted a completely separate circuit path isolated from the JT’s electrical and CAN bus. So I ran 2 6awg cables from my aux battery to under the rear seat of my JT. This was to use a Victron DC-DC 30amp charger for my 100ahr battery which runs my comm gear and a bunch of other accessories. All...

Interesting. I installed a victron DC-DC under rear seat of my JT with a 100ah battery. All controlled with a VOSswitch. Running Starlink, max br1 and other comm gear.

That sounds like injector tapping. Sounds exactly like mine even new off the dealer lot. The sound in the background is the typical typewriter sound of these engines. The louder sound is the injector. You can hear it at all speeds as you rev. Compared to other vehicles I’m m shocked at how loud...

Sounds just like mine as well. Noisy injectors. Mine is also on the right.

Agree.. I did just that when I added the Genesis dual battery. Have had that for over 2yrs no issues. The main and the small aux battery are in parallel not in series. I however did not pull any fuses or any relays during my install.

That’s typewriter sound your hearing are the injectors. My 2023 JTR sounds exactly the same but maybe a bit louder due to not having that plastic cover on the engine like you do. That cover deflects and deadens the injector noise down.

Agree.. a bit hard on that video as it sounds like the standard typewriter injector ticking. Mine had the typewriter ticking from day one. The main thing I noticed is that our engine don’t have that plastic cover on top which muffled the typewriter noise from the injectors a bit vs engines with...

Yep.. Ive been running that anytone and the the B01 speaker for a while. I chose the anytone dual band commercial as it is part 90. I run this along side my APX, XLS radios and satPTT. There a few quirks with this anytone radio that are just annoyances. For those that want and those that are...

I used the lugs under the cover

I do not have the Bluetti elite however I do have a 100ah battery under the rear seat and using a victron dc-dc behind the Genesis Gen 3. No issues. I ran a 6awg cable from the secondary genesis battery to the victron. I wanted a completely separate system to run my fridge, comms, etc. the...

I did mine with 80/20. This allows a hard mount below and above the bedline. The extrusion also creates a shelf or dividers for cargo or even other mounts. As to powering, I did a 12-48vdv POE. That way I only run 1 cable. If camping I can relocate the mini and solar away from the tree line if...

FYI… my brother and I have also found that Jeep and many service shops report all maintenance to carfax. Interestingly enough, Jeep created my account and sent me the login info. You can even edit and add your own service stats into it. I do however keep a running journal of maintenance in a...

Would you by chance be able to either send or post a pic with the rack on and the sunridder open? I’d appreciate it very much. Thank you in advance.

Thank you. Appreciate it. I’ve been looking at doing this exact system but haven’t found anyone with a sunridder that’s actually opened it with the rack on.. Rhino rack didn’t even want to acknowledge using the 36x40 vs the standard one when I called them. They only recommended the bigger size...

I’ve been looking at exactly this setup. Are you able to still open the sunridder with the 36x50? Any issues with stability in the sunridder or external wind noise?

Jeremy, could you share any other info regarding this particular install?? Im planning something very similar. Im interested in the mounting plates where the fuses are mounted to. What size battery would fit in this container and still be able to use the locking latches? Any info is appreciated...

Excellent news. Were you able to verify the charging status with your DMM? Don’t want to end up with dead batteries again. As to the CEL, that’s exactly what my brother experienced when he installed his Genesis. There were a few codes which we attributed to a pin in the harness not fully seated...

Yes pls do. Dumb question. I’m assuming you don’t have a battery charger to charge up the current battery? On a side note. When you do swap the batteries use your DMM and check to make sure you’re getting 13.5vdc at the battery terminal when running. This will show that the alternator is...