2020 Gladiator Overland 3.6L

[BrightWhiteGladiator]

• Go Rhino RB20 running boards with drop steps; textured black
• AVS Aeroskin II
• @Metalcloak frame-built front bumper #2401; fixed center with skid plate
• Gear America Mega Shackles with isolators; black
• Fuel Vapor wheels 20x9; matte black
• General Grabber A/TX E LT35X12.5R-20
• Overtread Doran hood w/ mesh side vents
• Carbon ceramic window tinting
• MOPAR FOX 2” lift kit
• Steer Smarts YETI XD Pro adjustable front track bar
• Steer Smarts YETI XD tie rod assembly
• Steer Smarts YETI XD drag link w/ Griffin XD attenuator; bottom mount
• Steer Smarts YETI XD steering stabilizer relocation bracket
• Steer Smarts YETI XD flex steering stabilizer/ damper bracket
• Steer Smarts HD-N steering stabilizer
• SkyJacker adjustable rear track bar (Where are you at with your version, Steer Smarts !?)
• New steering gear/ box (TSB 08-074-20)
• Synergy MFG front track bar and sector shaft brace
• Corsa PowerCore filter closed box air intake
• Rough Country throttle body spacer
• Anzo USA LED Projector Headlights - Plank Style Design; black
• Morimoto xb projector LED fog lights; black
• Matte black “Jeep” tailgate badge
• Matte black “Jeep” fender badges
• Aluminum powder coated dead pedal; black
• Matte black trail-rated fender badge
• Lamin-X tail light covers; smoke
• Luxe Auto Concepts lightwrap third brake light cover; dark smoke
• Lamin-X door handle cup paint protection
• Tailgate overland badge delete
• MOPAR tri-fold hard tonneau cover
• MOPAR sun shade
• MOPAR grab handles +5HP
• Superchips flashpaq
• Daystar do not flash OBDII plug +5HP
• Quake LED DRL fender lights with sequential turn signals & side markers in smoke
• Weathertech stone & bug deflector in dark smoke (to be replaced soon)
• Center console organizer +5HP
• Door lock latch cover buckle trim +5HP
• Boomerang tire tread console cover; black
• Rugged Ridge reflex stubby antenna; 9”
• L&R MOPAR front bumper endcap appliqués; black
• MOPAR receiver hitch plug
• MOPAR grille trim kit; black
• MOPAR all-weather slush mats F&R; black
• MOPAR door sill guards; black
• XG Cargo magne-lock mesh sun shade; black
• Bulletpoint Mounting Solutions Rubigrid multi-device platform dash mount
• Bulletpoint Mounting Solutions carbon fiber/ Kevlar arm
• Bulletpoint Mounting Solutions Rubigrid 20mm ball mounting plate
• Bulletpoint Mounting Solutions MagSafe Phone holder

SOON: @Metalcloak lo profile modular rear bumper w/ D-ring recovery points & rear quarter rockers
WHENEVER IT GETS RELEASED: Steer Smarts Yeti XD adjustable rear track bar
MAYBE: @Metalcloak Duroflex control arms; full set
MAYBE: @ACE Engineering Bed extender
LIKELY NEVER BUT BIG WANT: Magnusen supercharger kit

Sponsored

 

[nabegg]

She sounds like a beauty.

 

[BrightWhiteGladiator]

She sounds like a beauty.

I’ll post up some updated pictures next time my wife has the DSLR out... phone pics will have to suffice until then!

 

[BrightWhiteGladiator]

Wheels and tires finally came... about half the height of my electric car!

 

[BrightWhiteGladiator]

Wheels/ tires and suspension lift installed. Now sits at 77” - 78” tall with hard top on:

Last picture you can see the tires stick out a little less than 2” past the stock fenders. That is exactly what I was going for (whew!) Also, the wheels are +22mm offset so hopefully minimizing any undue stress on the axles.

 

[BrightWhiteGladiator]

Hood struts, Corsa intake, throttle body spacer

 

[thetruth1983]

Well that escalated quickly!

 

[BrightWhiteGladiator]

Here’s a closer look at the stock LED taillights with smoke Lamin-X vinyl on them. I just wanted them to be a bit darker and this did the job! Never had much luck with these in the past because I am terrible at application of them but all surfaces on these taillights are completely flat or relatively flat so they turned out great and just what I was looking for

 

[BrightWhiteGladiator]

Here are some photos of the MOPAR Tri-fold hard tonneau cover installed. I don’t think it made any claims to be waterproof, or even water resistant, but it just floods the bed when it rains and there are spots where the fitment is a bit disappointing. I may return it. Open to any suggestions if anyone has had good luck with aftermarket hard tonneau covers

 

[BrightWhiteGladiator]

Here’s a photo of the dead pedal installed. Really pleasantly surprised at the build quality for an eBay buy!

Pedal here: https://www.ebay.com/itm/362673063217

I think it looks better than the one listed on Extreme Terrain website and is about $20-25 less expensive

 

[thetruth1983]

Here are some photos of the MOPAR Tri-fold hard tonneau cover installed. I don’t think it made any claims to be waterproof, or even water resistant, but it just floods the bed when it rains and there are spots where the fitment is a bit disappointing. I may return it. Open to any suggestions if anyone has had good luck with aftermarket hard tonneau covers

I have the same exact cover and it doesn’t leak one bit. Did you follow the directions and install the drain tubes?

 

[BrightWhiteGladiator]

I have the same exact cover and it doesn’t leak one bit. Did you follow the directions and install the drain tubes?

I did and I did. The right rail was/ is missing the rubber seal (which I’m sure doesn’t help) but it gets equally wet front to back on both sides. I checked the fitment several times prior to tightening everything down and then readjusted and retightened. I may just need to scoot the entire top toward the tailgate. Still tinkering around with it before I give up on it.

 

[thetruth1983]

I did and I did. The right rail was/ is missing the rubber seal (which I’m sure doesn’t help) but it gets equally wet front to back on both sides. I checked the fitment several times prior to tightening everything down and then readjusted and retightened. I may just need to scoot the entire top toward the tailgate. Still tinkering around with it before I give up on it.

You probably need to adjust it but even then, it''s going to leak like crazy without that weather seal. The seal is there to keep out the water.

 

[BrightWhiteGladiator]

You probably need to adjust it but even then, it''s going to leak like crazy without that weather seal. The seal is there to keep out the water.

Phoned the dealership and they are replacing the piece that is missing the seal. Hopefully that will fix the leaking!

 

[thetruth1983]

Phoned the dealership and they are replacing the piece that is missing the seal. Hopefully that will fix the leaking!

Sounds good. Let me know if that stops the leaking.

Sponsored