A-pillar Mojave different??

[Northshoremb]

Keep looking at A Pillar light bar mounts and all say Excluding Mojave but what is the difference? From my Knowledge everything Exterior is the same on a Mojave to a Rubicon other than suspension, rims and Hood

Sponsored

 

[Freems]

Keep looking at A Pillar light bar mounts and all say Excluding Mojave but what is the difference? From my Knowledge everything Exterior is the same on a Mojave to a Rubicon other than suspension, rims and Hood

The only other difference I’m aware of on the M is the strengthening of its frame.

 

[jav_eee]

I think, and I could be wrong, that the cowl is different. I know when people want to swap into Mojave hood it involves more than just the hood. The cowl has to be replaced as well.

 

[wildtaco]

You can see it in this picture. The Mojave hood and cowl are taller than other models.

 

[jeepers29]

You can see it in this picture. The Mojave hood and cowl are taller than other models.

Winning answer.

 

[RCott77]

Winning answer.

Exactly! The cowl on the Mojave is taller. If you go for the A Pillar mounting brackets they use the top hole in the cowl and will overall will be too tall on the vehicle due to the cowl height.

 

[Northshoremb]

You can see it in this picture. The Mojave hood and cowl are taller than other models.

Ahh my friend has the Mojave and I have Rubicon and we never noticed. We thought was just differnet look due to the hood ve ts but thought the hinges and intake cowl were same. Thanks for pointing that out

 

[Volt0]

Fwiw, there are also previous threads covering questions about snorkels and cowel mounted lights

 

[GeneralMaximus]

Keep looking at A Pillar light bar mounts and all say Excluding Mojave but what is the difference? From my Knowledge everything Exterior is the same on a Mojave to a Rubicon other than suspension, rims and Hood

I too looked far and wide for Mojave compatible light mounts. KC is expensive but its the only one specifically marketed for the Mojave.

https://www.kchilites.com/jeep-wran...objectID=1073&indexName=PROD_default_products

 

[Rahkmalla]

if you're looking to mount a lightbar, just go with the Quadratec Stealth II. It's a lightbar ready to be mounted to your jeep for barely more than the price of a mojave specific bracket without a lightbar.

 

[GladiatorOfGrids]

I too looked far and wide for Mojave compatible light mounts. KC is expensive but its the only one specifically marketed for the Mojave.

https://www.kchilites.com/jeep-wran...objectID=1073&indexName=PROD_default_products

Artec industries. Designed strictly for Mojave

Sponsored