Advanced Safety features disabled?

[JAVIERGONZO]

Hey went on a trail this weekend, no rain, or mud, just rocks and dirt. I scraped twice once on sliders and once on skid plates.

On the skid plates one, I scraped on a clay dirt hill due to break over angle and 3 seconds later after I recieved a Advanced Safety features disabled message and said something about being interference? Both side view mirror amber triangles were illuminated the entire time. Got it to go away after just turning it on or off and hasn't returned.

But has anyone else had this? If so any tips on where sensors are.

EDIT: Posted in wrong section my bad.

Sponsored

 

[MMMII]

Happens to me when dust accumulates on the side of the tail lights. Most times at freeway speeds it will dust itself off. If on a trail I’ll give the sides of the tail lights a wipe off with my hand and all is good again.

We have a lot of dirt out here.

 

[brianinca]

Have also had it happen when slapping tree branches.

Happens to me when dust accumulates on the side of the tail lights. Most times at freeway speeds it will dust itself off. If on a trail I’ll give the sides of the tail lights a wipe off with my hand and all is good again.

We have a lot of dust out here.

 

[JTPatriot]

Yep dust accumulation on the sensors. Nothing to worry about.

 

[CerOf]

Ditto for me.

 

[Mr._Bill]

The sensors for objects behind you are in the rear bumper.
The sensors for objects beside you are in the taillights.
The sensors for objects in front of you are in a box against the windshield (if you have them).

 

[Blackjeepjk]

Driving on a feeder road that went under dual north/south interstate bridges, I was stopped in traffic under first bridge, traffic started to move, I went about 10ft moving with traffic and my ibrake hit hard. Locked wheels, threw me into seatbelt lock and car behind me almost hit.
I guess the light or shadow from the bridges must have activated.

 

[JAVIERGONZO]

Thank you all!

Sponsored