Are these OEM Mopar LED fender lights?

[LSUonyx09]

Trying to replace my halogen fender lights on my 80th anniversary with LEDs. Do these look like the OEM ones from the factory? Would these work to replace the halogens? Thanks

https://www.ebay.com/itm/233872739140?hash=item3673e6cb44:g:B8QAAOSwfl1hAU8q

Sponsored

 

[Jefe1018]

Does not appear to be an OEM part, but rather an OEM spec’d after marker look-a-like. The brand seems to be “Replacement”.

 

[LSUonyx09]

Does not appear to be an OEM part, but rather an OEM spec’d after marker look-a-like. The brand seems to be “Replacement”.

Yeah but do you think they will look and function the same to replace the halogens?

 

[Jefe1018]

Does the 80th anniversary have the same fender as the rubicon?

 

[LSUonyx09]

Does the 80th anniversary have the same fender as the rubicon?

It's the painted fenders like on the Overland and Rubicon. Not the same height as the Rubicon fenders obviously but same painted style.

 

[kevman65]

Both part numbers line up, shows compatible with 80th anniversary. Description on AMP does NOT specify if they are halogen or LED.

https://parts.allmoparparts.com/oem-parts/mopar-park-and-turn-signal-lamp-left-55112885af

If it were me, I'd spend the extra $7 and get free shipping from @AllMoparParts.com and be assured it's NOT a knock-off.

 

[LSUonyx09]

Both part numbers line up, shows compatible with 80th anniversary. Description on AMP does NOT specify if they are halogen or LED.

https://parts.allmoparparts.com/oem-parts/mopar-park-and-turn-signal-lamp-left-55112885af

Thanks. The ebay listing says LED. I am assuming this would be plug and play and need to use a Jscan to change the settings for the DRLs to work?

 

[kevman65]

Thanks. The ebay listing says LED. I am assuming this would be plug and play and need to use a Jscan to change the settings for the DRLs to work?

JScan, Tazer, JEEP reflash. JScan is cheapest option.

 

[LSUonyx09]

JScan, Tazer, JEEP reflash. JScan is cheapest option.

Have you done this?

 

[kevman65]

Have you done this?

I have factory LED's, so no. I do have a Tazer and it is one of the options.

 

[LSUonyx09]

Both part numbers line up, shows compatible with 80th anniversary. Description on AMP does NOT specify if they are halogen or LED.

https://parts.allmoparparts.com/oem-parts/mopar-park-and-turn-signal-lamp-left-55112885af

If it were me, I'd spend the extra $7 and get free shipping from @AllMoparParts.com and be assured it's NOT a knock-off.

Difference is the ones from AllMoparParts is just for one side. The ebay ones I linked are for both.

 

[mdyucca]

The ebay part shows to be direct replacement. At half the cost of Mopar it will be good to find out if the are plug and play.

 

[LSUonyx09]

The ebay part shows to be direct replacement. At half the cost of Mopar it will be good to find out if the are plug and play.

Exactly. I think it will just need the tazer or Jscan. It looks like it comes with the wiring harness. I just hope they look and function the same as the Mopar ones. I was hoping someone else had tried them before I order them.

 

[mdyucca]

Exactly. I think it will just need the tazer or Jscan. It looks like it comes with the wiring harness. I just hope they look and function the same as the Mopar ones. I was hoping someone else had tried them before I order them.

You can bet somebody on the forum has used them just a matter of them seeing your post and responding. I installed the Mopar lights and reset the lights to led with the Tazer. Worked perfect!

 

[LSUonyx09]

You can bet somebody on the forum has used them just a matter of them seeing your post and responding. I installed the Mopar lights and reset the lights to led with the Tazer. Worked perfect!

Awesome. I think I'll have to use a Jscan so hopefully it works well too. Where did you get your fender lights?

Sponsored