Bed accessory install. VIAIR constant duty, lighting and 3 gang switch.

[Paladin_JTR]

Quick Part 1 video I made of the mock-up process for my VIAIR install. Also showing the aux lights and 3 gang switch I put in where the factory outlet would be (or blank plate in my case since mine did not have that). I am putting the ACE Upper Decker on so I wanted extra lighting in there for under the upper decker. I also wanted to put that switch gang in there with the USB ports and 12v socket for my RTT and accessories for when my tent gets mounted. I will be using the air gauge, what I meant by not using was I will not be using the on/off switch included.

Bed lights
https://www.amazon.com/gp/product/B017XFF9IM/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Switch assembly
https://www.amazon.com/gp/product/B07ZZW65KJ/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

replaced the USB one on the switch assembly with this one since it is a quick charge and has the battery voltage monitor built in
https://www.amazon.com/gp/product/B07QXT4ZQ2/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

VIAIR kit
https://www.4wheelparts.com/p/viair-constant-duty-onboard-air-system-10007/_/R-BKTN-10007

Sponsored

 

[Paladin_JTR]

Part 2