Carrier bearing

[Mr.Wilson]

Does anybody use these??

Sponsored

 

[rharr]

Yes

 

[Minty JL]

Yes, running the AEV carrier spacer on mine with a MC GC 4.5" kit and no issues at all

 

[Greg_L]

I have one.

 

[Deadpool392]

Yes, 3.5 Clayton lift. It is about the easiest thing to install also.

 

[Hemy5587]

Same as the rest posting here and it is super simple to install!

 

[Reddout99]

Yes, I installed one too. 2" Mopar lift. Easy install

 

[rharr]

If you are cheap you can buy a piece of scrap aluminum from the local metal supplier take off bid, the spacers size is a common extrusion size and all you need to do is cut the piece to length and drill 2 holes. That's what i did for about 10 bucks. and 2 new longer bolts from ace.

 

[Reddout99]

I could be wrong, but I think I only paid around $30 for mine from Rock Jock, which I thought was too much, a year or so ago.

 

[JTL21]

There’s a teraflex 1.5” spacer on amazon for somewhere around $25. That’s the one I used with my Clayton 3.5”.

 

[Mathnerd]

Teraflex is the way to go. Should be able to find it for $25-$30.
No way is it worth 80 bucks.

 

[S3th136]

Same here. Very easy install and used with a 2.5 Clayton lift.

 

[Mr.Wilson]

So yeah I bought the one off Amazon. Guess I got hosed.

 

[Camaroboi13]

I used the Rock Jock one. Got it for free from @WILDHOBO and put it on in between text messages with him. Took all of 4 minutes if I remember correctly. Doesn’t matter how much you paid for it, it’s good to have regardless of price.

 

[WILDHOBO]

I used the Rock Jock one. Got it for free from @WILDHOBO and put it on in between text messages with him. Took all of 4 minutes if I remember correctly. Doesn’t matter how much you paid for it, it’s good to have regardless of price.

Spicer actually, but they’re all pretty much the same. Block of aluminum with bolts. Glad I had an extra one.

Sponsored