Clayton Off Road JT Suspension Systems

[JT1]

2-3”

Thanks!

Sponsored

 

[GladiatorCruzen]

This is definitely the most complete "base" kit on the market to properly lift and align the JT! Nice that you can add on extra control arms later. I have the 2.5" fronts and 3.5" rear springs on my JTR w/ Falcon SP2 3.3's and love it. 37's on AEV Borah's and no rubbing at all. Just remember to get a minimum 3" bump stop front and rear.

Your Jeep looks great. I added the bump stops to my 2.5 Ride Right+ order. Lift will be installed later this month.

 

[hjdca]

Over the weekend I ordered the Clayton 3.5" overland Plus kit and the Falcon 3.3 Adjustable shocks from Clayton using the 10% off. Clayton contacted me to say the shipping is one month out because they are waiting on Bushings. So, it's best to get your order in now to get your kit by mid. Jan..

fyi, I also ordered an Adams 1310 front driveshaft, Rear Driveshaft Carrier Bearing Spacer, and Rock Slide Engineering Steps from Northridge 4x4. I was lucky, and those were shipped right away.

 

[calipoontappa]

Got mine Monday, took a few weeks to get here. Installed the Overland Plus 3.5 kit myself in about 7-8 hours. The JTR rides much better than stock. Hardware is super strong and very heavy. Biggest struggle was the rear coils they are long AF. If you’re on the fence between 2.5 and 3.5 trust me you want the 3.5 it looks amazing.

 

[Clayton Off Road]

Got mine Monday, took a few weeks to get here. Installed the Overland Plus 3.5 kit myself in about 7-8 hours. The JTR rides much better than stock. Hardware is super strong and very heavy. Biggest struggle was the rear coils they are long AF. If you’re on the fence between 2.5 and 3.5 trust me you want the 3.5 it looks amazing.

Awesome! Always happy to hear! Post some pictures when you can

 

[jurfie]

Got mine Monday, took a few weeks to get here. Installed the Overland Plus 3.5 kit myself in about 7-8 hours. The JTR rides much better than stock. Hardware is super strong and very heavy. Biggest struggle was the rear coils they are long AF. If you’re on the fence between 2.5 and 3.5 trust me you want the 3.5 it looks amazing.

We don't trust you...post pics!!

 

[calipoontappa]

Thanks @Clayton Off Road amazing products, absolutely worth every penny.

We don't trust you...post pics!!

here’s one I’ll post more after a wash lol

Whoops wrong pic. Here ya go.

 

[CaptNkllm]

Will the falcon shocks that are made for a 2-3 lift work with the 2.5” kit?

hope so.

How far is the wait? Have a shipping label that says mid January ? Is that correct? Just wondering.

 

[GladiatorCruzen]

I ordered the front and rear bump stops from Clayton a few nights ago. Decided I may as well do them at same time to go with the 2.5 Ride Right kit I have going on later this month. Install is scheduled for 12/28. I’m not sure what is worse. Waiting for the Gladiator to arrive after ordering it, or waiting for the lift and tires to be installed! All the parts are almost here..

Ride Right 2.5+
Bump stops
Fox 2.0’s
37x12.5 Ridge Grapplers
17” Icon Rebounds

 

[Eazye]

Posted in another thread, went with the base 2.5 kit and left 1/2” spacer in from the Teraflex leveling kit on the front. Also added Fox 2.0 shocks (2-3” lift””) and 37” Patagonias. It rides every bit as good, maybe slightly better, than stock. I only went 2.5” since the Rubicon has the highline fenders from the factory.

 

[Clayton Off Road]

Will the falcon shocks that are made for a 2-3 lift work with the 2.5” kit?

hope so.

How far is the wait? Have a shipping label that says mid January ? Is that correct? Just wondering.

Yes those shocks would work!

Right now we're waiting on our next shipment of bushings to arrive, it could be anywhere between 3 to 6 weeks so we're just estimating shipping out at the full 6-week mark right now but it can always be earlier! Going on a first-come-first-serve basis so kits are shipping out in the order they were received

 

[Clayton Off Road]

Posted in another thread, went with the base 2.5 kit and left 1/2” spacer in from the Teraflex leveling kit on the front. Also added Fox 2.0 shocks (2-3” lift””) and 37” Patagonias. It rides every bit as good, maybe slightly better, than stock. I only went 2.5” since the Rubicon has the highline fenders from the factory.

Wow good looking truck!

 

[Gatorator]

I accidentally posted this in the for sale forum earlier. Doh!
I had the 3.5" Ride Right installed this week. I opted for the fifteen52 analog hd wheels with the 38" milestar patagonias. I also regeared to 5.13. I could not happier with everything!

 

[ttn333]

I accidentally posted this in the for sale forum earlier. Doh!
I had the 3.5" Ride Right installed this week. I opted for the fifteen52 analog hd wheels with the 38" milestar patagonias. I also regeared to 5.13. I could not happier with everything!

Those wheels look perfect for Gator Glad!

 

[Clayton Off Road]

Those wheels look perfect for Gator Glad!

agreed!

Sponsored