I need a steel rear bumper, any recommendations?

[69Commando]

Need recos.
I pushed up my rear bumper going off a drop off at a Jeep Jamboree and it bent my bumper up on the corner. Looking to prevent that in the future, also looking for some protection on the rear corners. I have the Sport S and not a Rubicon so I'm lacking the rock rail on the rear quarter. Any thoughts/recommendations?

Sponsored

 

[shrinkhead]

Getting a set of Rubicon take offs prob the best bet. The rear bumber is steel too

 

[Digger70]

I like this one https://www.quadratec.com/p/iron-cross-automotive/rear-bumper-black-jeep-gladiator-jt

 

[RodRecket]

I like this one https://www.quadratec.com/p/iron-cross-automotive/rear-bumper-black-jeep-gladiator-jt

Lacking the bed side protection.

I went with JCR because of their wrap around bed side pro and aesthetic. Expedition 1 was a close second.

 

[BrightWhiteGladiator]

Metalcloak:
https://metalcloak.com/jeep-jt-gladiator-rear-bumper-system.html



MetalCloak's Jeep JT Gladiator Rear Bumper is a strong, Lo Profile Modular System that provides additional break-over angle without sacrificing any of the factory options.
Features Include:

• Increased Departure Clearance
• 7GA Steel for Superior Strength
• Rear Step Convenience
• Tow Plug Electrical Outlet
• LED License Plate Light
• Works with Factory Sensors
• Works with Factory Recovery Points
• Does Not Interfere with Tow Hitch
• Seamless Fit With "Rubicon" Bed Side Slider Protection
• Black Powder Coat Finish
• Made in the USA

The MetalCloak Bumper for the Jeep Gladiator is a perfect mix of function and utility. The strong 7 gauge structure is built tough and has a low profile, close fitting design that allows for increased departure clearance without skimping on utility features like an integrated step, factory recovery point accommodations, protected electrical outlet, "Rubicon" rear bedside slider fitment, and room for a tow hitch.

You can add rear quarter rockers: https://metalcloak.com/jt-gladiator-rear-quarter-rockers.html

 

[Terry]

Need recos.
I pushed up my rear bumper going off a drop off at a Jeep Jamboree and it bent my bumper up on the corner. Looking to prevent that in the future, also looking for some protection on the rear corners. I have the Sport S and not a Rubicon so I'm lacking the rock rail on the rear quarter. Any thoughts/recommendations?

 

[Terry]

Look at Rock Hard 4X4 RG-8032 Patriot Series Full Width Black Rear Bumper in Black. Get the side rails too. 1/4" Steel plate, you will not damage this one. Mine is on order......

 

[Dav6662]

Look at Rock Hard 4X4 RG-8032 Patriot Series Full Width Black Rear Bumper in Black. Get the side rails too. 1/4" Steel plate, you will not damage this one. Mine is on order......

Did you get your bumper? If so how do like it? Any pics?

 

[Terry]

Did you get your bumper? If so how do like it? Any pics?

Not yet, I will post when it's here and on the JT

 

[Y2kcbr600]

I'm shopping Rustys Offroad.

 

[Buzzlb]

RR HD. Recommended.
Need bolt lights for the tag.
See The Overcon for details.

 

[Dav6662]

Not yet, I will post when it's here and on the JT

Wow...you said it was on order on 10/7....is it taking that long to get it?

 

[jmdwifi]

I bought one of these. It came with no bolts and my rear sensors don't work. I bought bolts and installed it. The sensor do not mount flush, so I need to take it back off and fiddle with the openings I hope. The cutouts on the corner are stupid. Looks like they are suppose to be steps but my foot doesn't fit and they look like they were chewed out. It's not horrible but I wouldn't buy it again.

 

[Mjolnir]

RR HD. Recommended.
Need bolt lights for the tag.
See The Overcon for details.

Yikes that is massive and worse than the stock for breakover angle

 

[DeezJT]

I like Reaper offroad for some reason. It looks menacing plus they use a liner.

the price though...pretty high yet will under 1k.

Sponsored