Let's see pictures of dirt bikes or trials motorcycles loaded in the bed.

[19Delta]

My Mojave is on order. I ride trials motorcycle and enduro, and I'm curious to see how the bikes will fit. In my current F-150 if I'm only hauling one bike, I put the front tire in front driver's side corner, then use tie downs to each foot peg. I can close my tailgate. I assume with the gladiator I won't be able to close my tailgate?

Sponsored

 

[JoseQ_80]

Probably not, unless it is a scooter or something small like that.

Here are two bikes in the bed, tailgate down:

There is a previous thread with more pictures here: https://www.jeepgladiatorforum.com/forum/threads/motorcycle-not-a-dirt-bike-in-the-bed.27285/

 

[19Delta]

Probably not, unless it is a scooter or something small like that.

Here are two bikes in the bed, tailgate down:

There is a previous thread with more pictures here: https://www.jeepgladiatorforum.com/forum/threads/motorcycle-not-a-dirt-bike-in-the-bed.27285/

Thanks! Cool setup you have! What ramp is that? Is it hard mounted on the sides? (I saw that thread, but I'm looking for dirt bikes, not Street)

 

[Zissou]

My Mojave is on order. I ride trials motorcycle and enduro, and I'm curious to see how the bikes will fit. In my current F-150 if I'm only hauling one bike, I put the front tire in front driver's side corner, then use tie downs to each foot peg. I can close my tailgate. I assume with the gladiator I won't be able to close my tailgate?

Doubt it but you don't need to close the tail gate. The tailgate won't hold your bike in, that's what the straps are for.
My old truck with a 6.5' bed I always had the tailgate down when transporting my Ducati Monster

 

[JoseQ_80]

https://readyramp.com/

 

[Renegade]

These are CRF15Fs, so they aren’t full size.

 

[Mac]

Haven’t hauled my WR250 in the JT yet, probably use my hitch carrier. I did haul an ATC200 I picked up to tinker with.

 

[mazeppa]

Haven’t hauled my WR250 in the JT yet, probably use my hitch carrier. I did haul an ATC200 I picked up to tinker with.

I hear 3-wheelers are excellent at high speed cornering.

 

[Mac]

I have had 3 wheelers off and on since ‘85, they have put me on the ground a few times…

 

[GoVR46]

I use Moto Cinch to secure my bikes so I don't need straps. Also helps by not putting a load on your fork seals.
Whats also nice is I'm able to get two bikes in with the tonneau still attached, so when I unload the bikes I can still lock up the bed for storage of my ramps.

 

[kgc]

I carry my bike in the same way you describe, strapped to pegs corner to corner, bike diagonal. I can get the tailgate halfway up with just one bike. Here is a pic of 2x KTM 300s. There’s enough room for gas, stands and ramp in the back, but not gear bags.

 

[19Delta]

I carry my bike in the same way you describe, strapped to pegs corner to corner, bike diagonal. I can get the tailgate halfway up with just one bike. Here is a pic of 2x KTM 300s. There’s enough room for gas, stands and ramp in the back, but not gear bags.

Good to know. Sweet rig you have there! I have the same color on order.

 

[19Delta]

I use Moto Cinch to secure my bikes so I don't need straps. Also helps by not putting a load on your fork seals.
Whats also nice is I'm able to get two bikes in with the tonneau still attached, so when I unload the bikes I can still lock up the bed for storage of my ramps.

Nice jeep and setup! That color, lift and tire combo is sweet!

 

[19Delta]

https://readyramp.com/

Thanks! I forgot about the ready ramps! I almost bought one for the truck I have, but just stuck with what I had. I will get one for the new Mojave. I looked at their website, but couldn't see how it clipped into the gladiator specifically. Does it go into the latch? Then release with the tailgate handle?

 

[redriderjf87]

Excited to try loading my TW200 and CT2, will post with each one loaded in, but I understand the TW being the longer of the 2 will just clear at an angle with the tailgate up. Long live the enduro.

Sponsored