Leveling my JT?

[MudderNuker]

Looks great!

Thanks.

Sponsored

 

[Mike5]

Terra flex 1.5". Leveled my 2023 Max Tow perfectly.

I'm thinking that is all I need as well. Mainly for looks. But, I'm changing out the BFG KM2s to a Cooper 285/75. No harder than mine will get used I'm not really worried about tire rub, but with the 1.5" leveling kit it should remove that chance completely, and look better. At least that is what I'm understanding. First Jeep and I have no clue.

 

[jav_eee]

Got the leveling kit, track bar, sway bar links, rear air bags and rear 3/4" spacers installed. I couldn't install the geo brackets due to not having a 24mm wrench since a breaker bar or ratchet do not fit on the drivers side due to the small gap between the LCA nut and exhaust loop. I tried an adjustable wrench but I didn't have enough leverage to get that nut loosened. Today, I'm ordering a beefier torque wrench up to 250lbs., and an extra long 24mm wrench. I managed to center the axle to within a 1/16 of an inch. The ride height is off about 1/4 inch from side to side but I'm thinking it will settle once I managed to get the control arm bolts loosened and tightened on the ground.

Which 3/4” rear spacers did you go with?

 

[MudderNuker]

Which 3/4” rear spacers did you go with?

If I remember correctly, they were Daystar.

Sponsored