wrangler 17io
Well-Known Member
- Thread starter
- #1
Hello every one, I am french and bought myself an US JT-R in Florida. I needed fog lights and orange rear turn lights to have french papers (our french "title").
For turn lights Ok, just need the Tazer I bought on quadratec + modify rear lights.
For fog lights using this topic on the forum to build additional lights on the rear bumper.
https://www.jeepgladiatorforum.com/forum/threads/write-up-for-adding-euro-spec-rear-fogs.39373/
That was the beginning of problems (error for myself, the topic is perfect):
- I have build the fog lights on the rear bumper ok
- I have mount a wire harness from the fog lights (switched on) to the interior of the truck, just near the BCM on the passenger side
- I have switched off the C5 and C6 from the BCM to see how the pin are done. I didn't have the correct pins to finish the working
- I have re switch on the C5 and C6 on the BCM, let the harness on the passenger floor and take time to buy the right pins on web market
Since this day no wipers (only water works on the windshield), only (turn) lights on the right front + rear left, and other little informations I don't have on the dash
I drove to my JEEP dealership, they don't find the solution... First they tried to reset the BCM and this one refused to reset. They have switch a JEEP computer on the car, BCM shows lot of mistakes.
I have bought a new BCM in USA last month to replace mine. It don't work with this new one, nothing, no engine running, nothing. I have verified the correct MOPAR number with my VIN number before buying.
So we don't know now what we can do or trying to do... Perhaps we need the US JEEP computer (I don't know the right word fotr that), my dealership has the computer for EU models. Or another thing...
Thanks for your help. Olivier
For turn lights Ok, just need the Tazer I bought on quadratec + modify rear lights.
For fog lights using this topic on the forum to build additional lights on the rear bumper.
https://www.jeepgladiatorforum.com/forum/threads/write-up-for-adding-euro-spec-rear-fogs.39373/
That was the beginning of problems (error for myself, the topic is perfect):
- I have build the fog lights on the rear bumper ok
- I have mount a wire harness from the fog lights (switched on) to the interior of the truck, just near the BCM on the passenger side
- I have switched off the C5 and C6 from the BCM to see how the pin are done. I didn't have the correct pins to finish the working
- I have re switch on the C5 and C6 on the BCM, let the harness on the passenger floor and take time to buy the right pins on web market
Since this day no wipers (only water works on the windshield), only (turn) lights on the right front + rear left, and other little informations I don't have on the dash
I drove to my JEEP dealership, they don't find the solution... First they tried to reset the BCM and this one refused to reset. They have switch a JEEP computer on the car, BCM shows lot of mistakes.
I have bought a new BCM in USA last month to replace mine. It don't work with this new one, nothing, no engine running, nothing. I have verified the correct MOPAR number with my VIN number before buying.
So we don't know now what we can do or trying to do... Perhaps we need the US JEEP computer (I don't know the right word fotr that), my dealership has the computer for EU models. Or another thing...
Thanks for your help. Olivier
Sponsored