BillR1
Active Member
- First Name
- Bill
- Joined
- Jul 21, 2024
- Threads
- 6
- Messages
- 35
- Reaction score
- 32
- Location
- Flagstaff, AZ
- Vehicle(s)
- 2021 JT Mojave
- Thread starter
- #1
I removed these yesterday to install a set of power steps. They're just over a year old and have zero damage.
$300 and pick up in Flagstaff.
Rock Hard 4x4™ RHX Series Tube Slider Rocker Guards - Flat Step for Jeep Gladiator JT 2020 - Current [RH-80124]
Rock Hard 4x4 is very proud to offer the heaviest duty and easiest to install bolt-on tubular rock sliders for the Jeep Gladiator JT.
RHX SERIES: These are built with the same strength and durability as our Patriot Series Sliders, but now include a top plate with traction enhancing dimple punches.
The RH4x4 Jeep Gladiator Tubular Rock Sliders are the ultimate rocker guard upgrade for wheelers of all skill levels. All the benefits of the low profile factory Rubicon rails plus a welded on tubular step that not only makes entry and exit from your Jeep easier, it also helps keep your body panels off the rocks!
Innovation and originality make these a world class body armor upgrade. 100% Made in the USA and an undisputed reputation as a game changer - meet the RH4x4 Tubular Rocker Guard set.
Functional Design
Each mounting rail is 2" x 3" .188 wall (3/16") thick steel making them indestructible rock crushers. Factory Rubicon sliders are built from .120 wall (1/8") thick steel. For those who were better writers than adders in school, our sliders are 56% thicker.
Each slider's end cap is welded shut to prevent debris, water, and dirt from getting inside. Factory sliders have plastic pressed in end caps.
Our welded brackets to the body mount locations are 3/8" thick steel. They don't even exist on the factory Rubicon Rails so we'll call that a 100% thickness upgrade.
We then set them in a jig and weld on 1 3/4" .120 tubing giving you a step you don't know how you lived without. The tube also helps keep your Jeep off the rocks by giving you a steel "cushion" that takes all the abuse the trail can throw at them.
Ease of Installation
The secret behind our system's ease of install is precise fitment. We mount not just to your body's pinch seam like "import" versions of tubular rails, we also mount to your body bolts with tabs over 3 times the factory width plus through the floor of your JT in existing holes. This means more mounting points for a stronger, rattle free, and exact fitting rock rail. Included in every hardware pack are shims that also allow for our heavy duty hardware to perfectly align your sliders underneath your Jeep for a look that can't be beat by "one size misfits all" imports.
What comes in every kit:
Driver and Passenger side Tubular Rocker Guards
Hardware
Installation Instructions
Three Reasons Why:
Ease of installation
Thickness and strength
Unmatched quality and fitment
$300 and pick up in Flagstaff.
Rock Hard 4x4™ RHX Series Tube Slider Rocker Guards - Flat Step for Jeep Gladiator JT 2020 - Current [RH-80124]
Rock Hard 4x4 is very proud to offer the heaviest duty and easiest to install bolt-on tubular rock sliders for the Jeep Gladiator JT.
RHX SERIES: These are built with the same strength and durability as our Patriot Series Sliders, but now include a top plate with traction enhancing dimple punches.
The RH4x4 Jeep Gladiator Tubular Rock Sliders are the ultimate rocker guard upgrade for wheelers of all skill levels. All the benefits of the low profile factory Rubicon rails plus a welded on tubular step that not only makes entry and exit from your Jeep easier, it also helps keep your body panels off the rocks!
Innovation and originality make these a world class body armor upgrade. 100% Made in the USA and an undisputed reputation as a game changer - meet the RH4x4 Tubular Rocker Guard set.
Functional Design
Each mounting rail is 2" x 3" .188 wall (3/16") thick steel making them indestructible rock crushers. Factory Rubicon sliders are built from .120 wall (1/8") thick steel. For those who were better writers than adders in school, our sliders are 56% thicker.
Each slider's end cap is welded shut to prevent debris, water, and dirt from getting inside. Factory sliders have plastic pressed in end caps.
Our welded brackets to the body mount locations are 3/8" thick steel. They don't even exist on the factory Rubicon Rails so we'll call that a 100% thickness upgrade.
We then set them in a jig and weld on 1 3/4" .120 tubing giving you a step you don't know how you lived without. The tube also helps keep your Jeep off the rocks by giving you a steel "cushion" that takes all the abuse the trail can throw at them.
Ease of Installation
The secret behind our system's ease of install is precise fitment. We mount not just to your body's pinch seam like "import" versions of tubular rails, we also mount to your body bolts with tabs over 3 times the factory width plus through the floor of your JT in existing holes. This means more mounting points for a stronger, rattle free, and exact fitting rock rail. Included in every hardware pack are shims that also allow for our heavy duty hardware to perfectly align your sliders underneath your Jeep for a look that can't be beat by "one size misfits all" imports.
What comes in every kit:
Driver and Passenger side Tubular Rocker Guards
Hardware
Installation Instructions
Three Reasons Why:
Ease of installation
Thickness and strength
Unmatched quality and fitment
Sponsored
