Sport S Build

jpfreak

Well-Known Member
Joined
May 27, 2019
Messages
63
Reaction score
128
Location
Pa
Vehicle(s)
20 Sport S
This is my DD so its not a crazy build. I figured I would document my progress and hopefully help anyone looking at any of these mods.

I ordered at the end of May in 2019 and took delivery on July 5th 2019. Ordered as a Sport S with Max Tow, Hard top, 7" Radio and Automatic.

IMG_2913.jpg

IMG_2914.jpg




First mods were a Teraflex 1.5" spacer lift, some Rockhard angled down sliders, an Extang trifold soft cover, Bedrug Impact Mat and got the windows tinted.

IMG_3302.jpg

IMG_3324.jpg




I found some JLU Rubicon take off wheels and tires locally. Around this time I also installed a 3/4" Daystar rear spacer lift and a Tazer for the new tire size.

IMG_3628.jpg

IMG_3630.jpg




Next, I added a Quadratec Stubby bumper and a Smitybilt 9.5 winch. The bumper and winch added quite a bit of weight to the front of the truck. I found some Mojave front coils being sold locally. Adding those makes it sit perfectly level.

IMG_1032.jpg

IMG_1144.jpg




After running the Rubicon take off tires for a while I decided I would rather have 35's. So, I went with General Grabber A/T's. This is how it sits today minus some take off Rubicon Fox Shocks and synthetic winch line I've added since the picture was take. Plus waiting on Oracle reverse lights to come in.

IMG_1545.jpg




I'm not sure what my future plans are yet but hopefully I'll be adding progress to this soon. Currently on the fence about adding some hood decals, but I'm not sure.





Advertisement

 
Last edited:
OP
jpfreak

jpfreak

Well-Known Member
Joined
May 27, 2019
Messages
63
Reaction score
128
Location
Pa
Vehicle(s)
20 Sport S
  • Thread starter
  • Thread Starter
  • #2
Swapped out the factory grille for a Mopar satin black grille and white surrounds to match. I think it came out great! I was nervous about the winch being in the way but it had just enough room. I put some cardboard between to stop any scratches.

8F210F14-C53A-4116-9960-83B257E4A686.jpeg


4DBC57B7-DE59-4511-96E0-A9DCE9BC5F78.jpeg
 
OP
jpfreak

jpfreak

Well-Known Member
Joined
May 27, 2019
Messages
63
Reaction score
128
Location
Pa
Vehicle(s)
20 Sport S
  • Thread starter
  • Thread Starter
  • #3
Picked up some used Inspired Engineering pod lights for my front bumper. I was able to run the wiring through the Quadratec QRC bumpers hoop. It’s worked out pretty nicely. I have a Rough Country MLC on order for future plans.

03013EFB-5409-443E-94B7-E239B7B32FD2.jpeg


52A6B0E8-3514-47EE-B549-4C309E4F5072.jpeg
 
OP
jpfreak

jpfreak

Well-Known Member
Joined
May 27, 2019
Messages
63
Reaction score
128
Location
Pa
Vehicle(s)
20 Sport S
  • Thread starter
  • Thread Starter
  • #5
Have you used the winch? Is the 9.5 enough for these trucks?
It’s a hair undersized for this application. I couldn’t pass it up do to the price. I’ve used it a few times but not for recovery purposes. It does what I need it to do.
 

Advertisement




 



Advertisement
Top