Sold: Virginia Synergy Track Bar and Sector Shaft Brace

[techteacher]

Fits 20-23 JT and 18-23 JL - note this does not fit 2024 models.

Used on my JT for several years and planned to reuse but no dice. Has relatively new sealed sector shaft brace bearing - no grease. O-rings for the pitman nut need to be replaced - they are cheap at Lowes.

$150 shipped

Sponsored

 

[steve68]

Did this help? did you have the steering box replaced under the TSB?

 

[techteacher]

Yes, I had the steering box replaced - I replaced basically everything involved in steering and I think every change helped a little bit. The Rusty's aluminum tie rod and drag link was probably the most noticeable change - prior it was easy to get blown around on a windy day on the interstate - afterwards it was much more planted.

 

[steve68]

Ok, I understand the windy day, mine was all over the place before the steering box swap, veer right, hit the I’m assuming the stop inside, dart left,

with the box replaced, still a little wanderly, I know this was a big help/fix back then,

 

[techteacher]

Once someone makes a 2024 compatible one, I'll definitely add it back. I took this one off fully intending to move it to my new one. Just happened across a post somewhere noting the compatibility issue.

Sponsored