What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS]

[Dr Kel]

I bought the same handles with white vehicle color matching grips and like them.

I went red for obvious reasons.

Maybe, I should have gotten a Rubicon for all of the red it comes with.

Sponsored

 

[RSK]

Nothing spectacular added grab handles and made fogs yellow.

I just use Lamin-X charcoal tint on my rear license plate lights to dim down the rear camera glare at night. It worked great and easy to Install.

 

[Tim]

@Tim so I took a few shots. But, I am adequately pleased given what the solution is. Not quite what the Ion Yellow bulbs in my Audi put out. I think the photos make them look more yellow that I feel they are.

First, just the fogs:

With headlights:

With headlights a d PIAA driving lights to see color difference:

Just fogs and PIAAs:

Thanks! Looks really good! I may do this as I need to drive in snow in the winter and the yellow light can be much easier on the eyes in that instance.

 

[MaximusDecimusMeridius]

Ok here is a vid I did of the aFe Power Rock Basher exhaust with a pulsar module set in performance mode. I couldn't get any shots of WOT...I was a little afraid of the road conditions.



@chrcal14 @DylanR @Pizziola29

 

[Pizziola29]

Ok here is a vid I did of the aFe Power Rock Basher exhaust with a pulsar module set in performance mode. I couldn't get any shots of WOT...I was a little afraid of the road conditions.



@chrcal14 @DylanR @Pizziola29

Wow! That sounds great! Did you buy the muffler and then do the short tail pipe?

 

[Jake]

A short while ago and bought a Garmin GPS system to use until an aftermarket stereo company comes out with a decent stereo system with navigation at a reasonable price. And I also got a RAM mount for my cell phone that I put on my driver grab handle. Well I was so pleased with that RAM mount that I went ahead and got another RAM mount to attach to my passenger grab handle. Putting the Garmin GPS there. Very easy to see and does not block anything. Mucho pleased.

Added a RAM cell phone holder to my drivers side grab handle. Have my cell phone hanging down at the bottom so I can still use the grab handle.

 

[MaximusDecimusMeridius]

Wow! That sounds great! Did you buy the muffler and then do the short tail pipe?

It's included with the kit. You drop the stock exhaust and then bolt this on with three clamps and one hanger

I put a link to it in the video description

 

[chrcal14]

Ok here is a vid I did of the aFe Power Rock Basher exhaust with a pulsar module set in performance mode. I couldn't get any shots of WOT...I was a little afraid of the road conditions.



@chrcal14 @DylanR @Pizziola29

Sounds good, and definitely up out of the way. Do anything for the butt dyno?

 

[chrcal14]

A short while ago and bought a Garmin GPS system to use until an aftermarket stereo company comes out with a decent stereo system with navigation at a reasonable price. And I also got a RAM mount for my cell phone that I put on my driver grab handle. Well I was so pleased with that RAM mount that I went ahead and got another RAM mount to attach to my passenger grab handle. Putting the Garmin GPS there. Very easy and see and does not block anything. Mucho pleased.

I did exactly this as well from CMM, but for my phone which I was getting tired of slopping into the cup holders. It's the perfect place, sits just the far side of the tune knob just like your pics show, infinite angle and tilt adjust with the Ram ball mount, handy to the plugs if I want to plug it in, and from what I can tell the grabby doofer mount with my soft phone case isn't going to go anywhere even if I rattle the crap out of it.

Nice!

 

[Twizzler]

Time to catch up with y’all and your updates!

- Mopar bed cover
- Covercraft Carhartt Precision Fit Covers
- Pixel Decals!
- Duratracs, 275/65R18

 

[CarolinaGladiator]

I like those seat covers. Nice fit for sure!

 

[Twizzler]

I like those seat covers. Nice fit for sure!

The front seats are a better fit but I assume they have tweaked the measurements and design from the JL seats.

The back seats would benefit from more attention to detail but overall they cover the vital areas prone to kid carnage. I bought these the day they were available so I'm sure future orders might be a more accurate fit.

 

[bhbdvm]

A short while ago and bought a Garmin GPS system to use until an aftermarket stereo company comes out with a decent stereo system with navigation at a reasonable price. And I also got a RAM mount for my cell phone that I put on my driver grab handle. Well I was so pleased with that RAM mount that I went ahead and got another RAM mount to attach to my passenger grab handle. Putting the Garmin GPS there. Very easy and see and does not block anything. Mucho pleased.

The Ram Mount is great and I use it on my motorcycle but something to consider. I initially purchased the Grab Bar Mount from Carolina Metal to do exactly as you did. However, in my opinion the Ram Mount is difficult to use with one hand and is cumbersome reaching over the center console with both hands. 67 Designs makes a great universal phone holder that is spring loaded and only requires one hand to EASILY attach or remove but I had to reorder a 20mm Grab Bar Ball from Carolina Metal and switch out the initial 1 inch ball for the grab bar. 67 Design has a little longer extension but I like it better because it is closer to me. Especially while texting and driving (JUST KIDDING!).

 

[TrailHiker]

I got the 67 phone mount kit for the Gladiator, works great, stays put.

 

[bhbdvm]

I got the 67 clue phone mount kit for the Gladiator, works great, stays put.

That's what I originally had in mind for the 67 Design but the more I thought about it, for me, I just wanted the phone more to the right and closer to cord/USB outlet for CarPlay.

Sponsored