Thanks to that offer. Will PM you. And I think you may be right. You are on the west coast and I am on the east coast, may be a pretty penny to truck it across America.
Jack. I installed a warn evo 10S with a warn winch plate on a OEM steel bumper. I used the mopar grill gaurd. It all works!!!!
I used Maximus 3 guard with there light mounting taps that are for THE Jeep Steel bumper https://maximus-3.comLove to know where you got your grill guard from. What brand is it? I am thinking of getting a Rubicon steel bumper and to that I would add a grill guard and I would add a set of fog lights to that grill guard. See the much lower Mopar guard on this red Jeep. I like the looks of yours. Thanks to advise the brand name and who sells it.
View attachment 65143
First glance I thought that was the Old Bell Telephone truck colors -Pool truck
I have a little update about this. Spoke to a guy from Speed Dawg today. The manufacturer has a copy of my email with my simple suggestion idea about how to reduce the ball height, just make the threads of the transmission shifter adapter go all the way down to the bottom of that adapter. There’s plenty of room inside the ball for the adapter to go all the way inside the ball. The manufacturer will make this change but it may take them a month to get this done. Once done they will send me a new shifter adapter that is properly made. Problem soon to be solved.
I saw a video of a guy taking a hammer and some tool to knock the shifter off. He put painters tape under the shifter to protect it from getting scratched up. I went to Lowes and got a wooden paint stirrer. I cut that in half and hammered at that to knock the shifter up a tad. Then it was easy to pull it off.
The adapter is rather tall, a lot taller than it needs to be. There’s 2 screws on it that you tighten to the shaft with an Allen wrench. Look at this picture and you will see that it could be shorter by 1/2 inch. When I spoke with the guy from Speed Dawg he told me that he also suggested to the manufacturer that the threads could also go higher up into the ball to also reduce the height. Spoke with him today and he told me that the manufacturer is working to reduce the height. I think they will have a shorter solution soon.
Nice set up. I’ve been considering the 10” VooDoo rack. Is the tonneau cover retractable?Added the Warn bar and 10" VooDoo Rack this week....more to come...until the well runs dry....maybe
Would you have a part #Got the Mopar winch guard installed on the factory steel bumper - really fast/easy install - very little obstruction with the front trail camera option - looks great!!! Expensive bit of thin steel for $182.00 delivered off Amaon
Mopar Winch Guard
Remove 3 torx bolts
Mopar Winch Guard
Doesn't cover up the tow hooks
Mopar Winch Guard
Not blocking the front trail camera
Mopar Winch Guard
Great looking guard!! Next up which winch?
Mopar Winch Guard
The part # is 82215351. The list price is $249, I paid $223. The price of $181 is probably the lowest you will find!
