What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS]

[Comicnut25]

Any pictures with the JK Pintlers on? I have the same situation but have not installed new tires on them. I was told they stick out more because of the difference in offset

Yes .. they are the perfect fit

Sponsored

 

[Mojavicon]

Congrats. What is the bottom pic?

It's the control head for the iDrive throttle controller.

 

[BLK HOLE]

What bumper is that? I like how the winch sits down

Shrockworks. Out of Houston...long lead times, so beware. There are several recessed bumpers out there as well.

 

[-miko-]

Well after work i just had to install my Lucille bed stripe, “ My Lucille “

Love those wheels. Some day, some day...

 

[Texops]

Love those wheels. Some day, some day...

Thanks

 

[BlackDog]

Installed a 2g rotopax water canister to match the 2g fuel canister...

Oh, and also moved to Evergreen, CO.

Welcome to the neighborhood!

 

[Logan94605]

I spent my smoke filled day installing the Z Automotive Tazer and Front Facing Cam. Pretty easy install thanks to the YouTube videos from Casy 250 and JTR Spartacus!

 

[TrainMan]

EGR window visors. The front ones don't use any adhesive, they just pop in with some twisting. The rear does use 3m adhesive. Windows kinda struggled to go up at first, but I believe after a few days things should settle in.

 

[Bkinnell]

Some little add ins that I stole from following the thread..

1- blacked out 4x4 Trail Rated Emblem. Going todo the JEEP emblems next week

2- Mopar Door Sill guards.

3-JEEP Valve stem Lids... Adds 10HP I think....

4. - Jeep Dead Peddle

 

[Old and Broken]

Bkinnell, I don't want to rain on your parade as they say but want you to know of my experience. I put those valve stem caps on my JT last fall. The salt and brine treatments used on the roads here in NE Ohio have "welded" them on to the valve stems. Mine goes in next week to have the tires removed, valve stems replaced, tires remounted and rebalanced. Just a heads up for you.
Rich

 

[ShadowsPapa]

Some little add ins that I stole from following the thread..

1- blacked out 4x4 Trail Rated Emblem. Going todo the JEEP emblems next week

2- Mopar Door Sill guards.

3-JEEP Valve stem Lids... Adds 10HP I think....

4. - Jeep Dead Peddle

How bad was the dead pedal install? I REALLY need one. My WJ has a good place to rest the left foot when driving, the JT - meh.......

 

[ShadowsPapa]

Started the REDARC trailer brake controller install. The hardest part so far was the 12volt socket removal. The tool didn't really help at all, and in fact, made it more difficult because it's die-cut, has rough edges that made it not fit those square holes well, plus, it shoved the metal out because if the extreme tight fit and made it wedge against the plastic it was supposed to release!
It fit perfectly in the 12 volt outlet piece it comes with, not worth a darn in my JT outlet. Had I known this before trying, I'd have filed it to fit the holes better and not had it flare those little square holes out into the plastic like it did. In the end, the tool made things worse because of the poor fit - so it took nearly an hour to remove the 12v socket without damaging things. (want to relocate it to the glove box area if I can figure a way to feed that wire over that way)

Everything else is installed and connected, just need to but the little knob/control part in place and put things back together.

 

[Bkinnell]

Bkinnell, I don't want to rain on your parade as they say but want you to know of my experience. I put those valve stem caps on my JT last fall. The salt and brine treatments used on the roads here in NE Ohio have "welded" them on to the valve stems. Mine goes in next week to have the tires removed, valve stems replaced, tires remounted and rebalanced. Just a heads up for you.
Rich

Bkinnell, I don't want to rain on your parade as they say but want you to know of my experience. I put those valve stem caps on my JT last fall. The salt and brine treatments used on the roads here in NE Ohio have "welded" them on to the valve stems. Mine goes in next week to have the tires removed, valve stems replaced, tires remounted and rebalanced. Just a heads

How bad was the dead pedal install? I REALLY need one. My WJ has a good place to rest the left foot when driving, the JT - meh.......

Thanks Rich for the heads up! I’ll be removing mine before winter for sure.

 

[Bkinnell]

How bad was the dead pedal install? I REALLY need one. My WJ has a good place to rest the left foot when driving, the JT - meh.......

It was pretty easy. Took me 20-30 mins. Lots of different angles you can tweak to your like. I like it a lot.

 

[ShadowsPapa]

It was pretty easy. Took me 20-30 mins. Lots of different angles you can tweak to your like. I like it a lot.

Thanks. That's another bit I can add to this truck to make it even better on trips.
Time to find/purchase.

Sponsored