What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS]

[Buttercup]

Joined MOJO (Mid Ohio Jeepers Organization) and needed a flag mount for next weekend's Go Topless run. A couple of $0.50 conduit hangers and I'm in business.
Now - the cheapass flag I bought has started to tatter and the stitching is coming undone after less than 20 miles. Any suggestions where to get a good one?

NIce, Go to a marine (boat stuff) supply house. Those flags are designed to flap in a good breeze behind powerboats and big fancy boats. The breeze offshore ain't gentle.

Sponsored

 

[GEETCH]

Working on installing the last motobilt skid plate, the holes are in the frame but not threaded in five spots for the last plate. I didn’t want to weld into my frame yet so I ordered but serts aka barrel nuts aka rivnuts ect. Now those are installed just need to get the proper bolts and hang the last plate.

 

[FishChowder]

We are weird.
How does the s’more stick work? I’ve only stuck a marshmallow on a stick before.

I once had something like this for s'mores. It worked ok. Cast iron. Just slam it all together and toss it in the fire like a marshmallow...rotate as desired.

 

[Blue Ridge]

Installed an Under The Sun insert. It looked too open with the honeycomb black parts taken out so I replaced them and now you couldn't make out the olive drab flag. Fortunately I got it double sided (with one side in black just in case), so just flipped it and replaced the OEM black grill. Not a bit noticeable unless you're up close, but I'm happy with it.

 

[Ohio JKU]

My son and I put the new soft top on!!!

We also got the soft top on the jku

Now if the weather will cooperate

 

[Lucky1]

mopar lift goes in next week. 17x8.5 +20mm wheels wrapped with 305-65/17 toyo AT3.

Quick question, how "noisy" are those toyo's? I am really considering purchasing a set of them.

 

[Trauma PA]

Quick question, how "noisy" are those toyo's? I am really considering purchasing a set of them.

This question wasn't directed at me but I'll speak from experience. I put the AT3s on my daughter's JKU and they are very nice, smooth riding, easy to balance and quieter than the KO2s we had on her Jeep. She is running 305/70/17.

 

[Trauma PA]

I took the top off for the first time. As others have said, it's not heavy but it is a little awkward.

 

[49Gramps]

Two weeks old and all I've done so far is door edge guards, wheel locks, Mopar rubber mats and sill entry guards. On the other hand, there's some Rock Slide steps, Artec Skids, and the Terraflex front spacer kit on order....

 

[HooliganActual]

Installed my ARB Twin with an 813 Fabrications mount plate behind the rear seat. Plumbed it to an ARB quick connect coupling mounted under the seat. I am running it off the Aux 3 switch.

For anyone considering this mod, the included ARB wiring harnesses are the right length to get the control wires to the internal Aux switch wire cluster, but you will need 10 feet more length on the power leads to the battery.

 

[GEETCH]

Well got the last skid plate on, the rivnuts worked great. Today testing out my gladiator cargo net bringing stuff to the goodwill. Also found my hitch skid plate worked well holding my vice for drilling a bracket lol.

 

[Ridgeline]

Dropped my windshield today so I could install some a-pillar mounts and light bars. Also mounted my traction boards.

 

[bhadfield]

Finally got the driver's side MOLLE panel dialed-in with the MAX Multi-Purpose Axe, Survivewear First Aid Kit & H3R Fire Extinguisher.

The goal was to keep the bed light as unobstructed as possible and maintain access to the cargo tie down and be able to access and remove any of the 3 items while leaving the others in-place. After a few different different configurations landed on this one and am pretty happy. the axe and fire extinguisher are held down with quick fists and the first aid kit has a molle/velcro panel that it is attached to so it can be removed from the rig if needed.

Now to start working on getting the recovery gear mounted on the passenger side.

 

[gerky18]

I out in some new LED fog lights. The are turn yellow turn signal, DRL, and fog lights. I also put on the DV8 front and rear fenders. I also finally got around to washing it too.

 

[mdyucca]

My wife got me a new SOS ROPS Kool Kup (Mothers Day, Go figure). She found it on instagram @sweet.impressions_

Sponsored