What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS]

[19Comanche86]

Installed a rubicon metal skid plate today. That pos plastic one is an absolute joke, plus is hangs down 3+ inches lower.

next up I’m gonna install my seat heaters and katzkins leather and that’s pretty much it for this truck. Back to work on my Comanche.

Sponsored

 

[ColoradoGlad]

Installed grab handles from darksidedesign, and a Truxedo ProX15 tonneau cover.

Man, LOVE this color! Especially with the color matched fenders and top!

 

[XJADDICTION]

Added 2” wheel spacers for the stock wrangler rubicon rims carrying 37” BFG KOs. Also tightened the RE track bar as I noticed wander and the tell tale signs of imminent DW starting to creep in a after RE 3.5” lift.

Huge improvement with stability, ride and handling with the spacers…. And they look awesome! And, DW hint is gone. Check those track bar bolts at the axle for all of you with a lift and aftermarket TB.

 

[gecko_rubi]

392 emblems … color match hooks and tailgate are next just ran out of time.

 

[MissionMan]

Changed the silver adjustable latches to black and put in rivnuts to keep them attached to the bed so I can lock the soft tonneau down when I need to. Jeep would probably charge $500 for these $30 latches with a Mopar logo. Just waiting on some black m5 bolts and its all done.

 

[Tuggernuts]

Drove her north 250 miles on Thurs to take our granddaughter home to Atascadero, CA. it took F O R E V E R. For those that know California, the I-5 was closed at
Gorman due to snow, but people knew it from the news so it took NINE HOURS!!!!. Between Ventura and Santa Barbara the freeway was restricted to 2 lanes due to widening and some areas were partially flooded.

Got up to return and left at 4:15am. Got home in 3+ hours but I was ass-dragging tired. Slept in then washed her. Not supposed to rain again for at least another week.

Took my son 15 hours to get from Disneyland to Chico (2hrs north of sac) absolutely brutal.

 

[XJADDICTION]

Some more pictures with 2” spacers and stock wrangler rubicon rims wrapped in 37x12.50x17 BFC KO2s

 

[ospreyfe55]

Printed a Tazer cheat sheet onto photo paper and stuck it on the back of the visor for quick access. The few times that I need to access the menu, I have to look it up on my phone. I like the feature of using the key fob to turn on the bed lights, so I put that on along with light show instructions.

I made a cheat sheet booklet to be printed and left in the glovebox. I really like your idea as well. Do you have a file I can get from you to keep from recreated your visor label? Below is the tread link to mine.


https://www.jlwranglerforums.com/forum/threads/tazer-jl-mini-cheat-sheet-document.71981/

 

[ospreyfe55]

Changed the silver adjustable latches to black and put in rivnuts to keep them attached to the bed so I can lock the soft tonneau down when I need to. Jeep would probably charge $500 for these $30 latches with a Mopar logo. Just waiting on some black m5 bolts and its all done.

Do you have a link for all the parts need to do this? I would love to be able to lock mine as well.

 

[Rockabillyroy]

Changed the silver adjustable latches to black and put in rivnuts to keep them attached to the bed so I can lock the soft tonneau down when I need to. Jeep would probably charge $500 for these $30 latches with a Mopar logo. Just waiting on some black m5 bolts and its all done.

I'm tempted to try this on my diamond back to go keyless on the rear panel. Maybe even get rid of the locking rods.

 

[mike921921]

Do you have a link for all the parts need to do this? I would love to be able to lock mine as well.

Looks like this one with part of the hook ground off....
https://www.amazon.com/Adjustable-Holding-Capacity-GH-4003-Lockable/dp/B08CDSGZNF?th=1

 

[ospreyfe55]

Looks like this one with part of the hook ground off....
https://www.amazon.com/Adjustable-Holding-Capacity-GH-4003-Lockable/dp/B08CDSGZNF?th=1

Yes it does! Thank man. My amazon access isn't that great here at work!

 

[Jeepmonster]

I made a cheat sheet booklet to be printed and left in the glovebox. I really like your idea as well. Do you have a file I can get from you to keep from recreated your visor label? Below is the tread link to mine.


https://www.jlwranglerforums.com/forum/threads/tazer-jl-mini-cheat-sheet-document.71981/

I'll PM you the Excel file. I printed on 4x6 photo paper and trimmed.

 

[TotallyReasonable]

Offroam phone holder

These look great, do you think it could hold up a small tablet? My dash quickly filled up and it way too full for my liking now

 

[USMC-SSGT]

As the kids say.. yolo

Sponsored