Rigid SR midnight 6” on Mojave

[Toyfrog]

Are the mounts Mojave/392 specific? I looked on the website and couldn’t find any info stating they were. I like the low pro light and mount combo. Thanks for the help.

Sponsored

 

[MJRSC]

Are the mounts Mojave/392 specific? I looked on the website and couldn’t find any info stating they were. I like the low pro light and mount combo. Thanks for the help.

They’re not. They’re actually labeled as not compatible. Only reason being the bolt that mounts them is too short. So you have to get some m6 by 80mm or 3” bolts. Long and narrow so not the easiest, but not the hardest to find. I’d like to find some in black. But any good grade stainless (and I threw a little anti seize on) should be good.

 

[Toyfrog]

They’re not. They’re actually labeled as not compatible. Only reason being the bolt that mounts them is too short. So you have to get some m6 by 80mm or 3” bolts. Long and narrow so not the easiest, but not the hardest to find. I’d like to find some in black. But any good grade stainless (and I threw a little anti seize on) should be good.

Thanks for the help, probably gonna copy you guys, hope y’all don’t mind. ?. There is a Fastenal just down the street. Gonna look for some black bolts, I’ll let you know what I find out. Thanks Again.

 

[MJRSC]

Thanks for the help, probably gonna copy you guys, hope y’all don’t mind. ?. There is a Fastenal just down the street. Gonna look for some black bolts, I’ll let you know what I find out. Thanks Again.

Copy away, I saw a member with this exact set up and loved it and I did the same.

Hey, let me know what you find - I'd be happy to Venmo you for some if you find something that works and would throw them in the mail. Our Fastenal won't sell to individuals anymore and if I recall someone said they don't make anything that small/long.

 

[AyeCantSeeYou]

Plasti Dip for the bolts? Would definitely give you a black color for them.

 

[MJRSC]

Plasti Dip for the bolts? Would definitely give you a black color for them.

May give it a shot since it’s so small. I’ve never really used it, can I take a tiny brush and brush the screw heads or it’s all spray can?

 

[AyeCantSeeYou]

May give it a shot since it’s so small. I’ve never really used it, can I take a tiny brush and brush the screw heads or it’s all spray can?

I haven't used it myself, but know a few people that swear by it. There's more than one way to apply it - dip, spray, and paint. If it were me, I'd want to dip the bolt heads and leave the threads bare. https://www.amazon.com/Performix-12213-Plasti-Dip-Black/dp/B00I9SK8XY?ref_=ast_sto_dp

Sponsored