Search results

Im curious what offset or backspace is best for JTs on 42s or 44s? At this size most everyone is running Trepadors or Bajas which would be what I would get. 17s or 20s are up in the air, and Im running UD60s right now (stock WMS). Im guessing we need to do some serious offset to not rub on the...

I'm running Evo's Fusion 4.5" with rear 6.5" springs from when I towed a trailer (which I don't now). I could fit 42-43" tires now (have 40s now), but would like to switch out the rear coils for coilovers. Evo only majes a rear coilover kit that is 3-5" adjustable, so it'll lower my rear a bit...

Appears many AFE and other files have run in to this as well. I installed the Hauk snorkel kit. Now I'm having this code pop. Anyone figured out a fix?

Does anyone know if you csn disable the tazer feature that turns on the reverse lights if you hit the unlock button 3x? It's bugged where it's sometimes doing it with a single press. At night you may not realize they are on until you are blinding everyone on the highway. Sucks.

Who has rear HD Coils at a 4.5-5" lift height that are built for heavy loads(diesel + gear)? Tried Evo and it sags too bad. Had to add a 1.5" spacer to level it within 1/8" of the front. Their kit must be designed for an unloaded bed and no spare tire. But, I have a tire carrier, 40" spare. Roof...

Anyone know of a 4.5-5" lift coil for the rear that has a spring rate designed for the diesel and heavier rigs with lots of equipment? The Evo 4.5" HD coil sags so much I had to add a 1.5" spacer to compensate so that one is out. Heck, I had to add stacked airbags because the 1.5" spacer only...

4.5" Evo Fusion (front coilovers, rear springs) on Diesel using Evo's diesel springs ... front sits super low, back is raked by 2.5". This is with their 200/400 springs and the preload all the way (which is crazy). Anyone run in to this?

Anyone on a 3.5-5" lift and done a set of airlift springs on the rear? Since the spring is so much taller, I've been thinking ... what if you could stack them? 1 nozzle up, the other down? Anyone ever tried this to see if it works?

Anyone figure out what airbags fit the 4-5" spring lifts without stacking a huge amount of spacers? I want to retain near full compression and flex.

So, I'm an experienced crawler but I needed to build something a bit more family friendly. I'm wrapping up a JT on Tons & 40s build, but keeping the bed stock length for storage. Next time we go out for trips to Moab/Rubicon/CO/etc I'm concerned about how difficult the overhang/departure angle...

Apparently PSC doesn't have a kit for the diesel yet. Anyone know of any other solutions that will work to get more power out of this setup or another ram solution?

Does anyone have the Evo Enforcer Pro lift with the rear coilovers? I need measurements to determine what length coilovers they are in the rear. They are custom built but I heard they are 12.5" so just a hair over a standard 12" coilover.

Is there a factory harness that is there and if you select the option they just pop the panel in and connect the plug? I don’t need to do a crazy mod and drag 10g wire from the battery if the factory harness is there. Anything I would plug in would be mild. I crawled underneath and there are a...

So, the Gladiator has a dual battery setup from the factory with a small accessory battery, right? But, since I have the Diesel you can't do an aftermarket dual battery setup according to Genesis. So, has anyone replaced the primary with a larger AGM (Odyssey, Optima, etc) and then looked for a...