Search results

For anyone with the 2” Mopar lift, when you disconnect your sway bar, do you have to be rolling for It to release (or to reconnect)? I swear on my stock suspension (20 JTRLE) I could be dead stop, hit the button, 2 seconds It could cleanly do what I requested. Now It seems like It needs some...

Any thoughts as to why that is? Too many people buying the non tune version (using your tune), and they’re taking a profit hit? The profit margin for their kit w/tune must be larger than just the kit without It. I’m not 100% educated in the methods/regulations/validation of tunes and getting...

Gotcha, we’ll as i said to Dakotaz, if you do go and remember, please ask them if this would apply to Gladiators as well, or if they run separate DTCM versions (which 99% sure they would) but just curious if theirs any other info out there from other dealers. I love my dealer, been out drinking...

Gotcha, was gonna ask a favor and see if they knew anything about updating the DTCM for the 20’ Rubicons, but if they didn’t know about the Mojave’s I’m guessing they definitely won’t know about the Rubi’s….. I still would be interested to know what version DTCM you are currently running and...

You’re welcome! Are you planning on getting this done?!? (Or is anyone else?!)

08-030-21

Yeah I know, some of the stuff tazers do is super clean, some of It is hack job (ie. The lockers in 4hi, the dash still blinks and tells you to switch to 4 Lo, yet It locks, sometimes the dash endlessl flickers, gives warnings,, constantly toggles FCW on and off, someof the latest firmware...

Some more info on this front, there is a TSB for the Mojave’s which do not have this option available. In order to make It work, the TSB instructs the dealer to update the Drive Train Control Module to the latest version and It should then work. Had my dealer check out my 2020 Rubi and he told...

Well just checked mine, not pinched shut / assembled incorrectly…..guess I’ll have to look into the vent blocks, I just do not like the looks of them at all…..maybe I can 3D print some low profile fins to angle It toward the edges. Has anyone tried removing the dash/vents? How much of a PIA is It?

Its so weird, I remember seeing this Star case in mid July and didn’t think much of It (never noticed an issue the past two years). So I’ve been working in the Dominican for the past month, but now home, and it’s getting cold around here (CT). I’m noticing my defrost is mostly clearing the...

They do have a STAR publication regarding the issue, anyone confirm they don’t have a pinch / incorrectly installed duct work???

Excellent!! Just out of curiosity what did you use. The WD40 I originally used lasted up until about now (getting bitter cold again) almost a year, so I never did the grease, but now it’s time for the more adequate dressing. I have Lucas Marine Grease that I use for my GP1800, stuff is great...

#22 was correct, as stated their should be an L and an R molded on them anyways as well as the actual part number. If you’re lucky like I was, these parts were just replacements for what my Jeep already had on them, so their was no guess work….but for me and @StingyJT #22 was correct (discussed...

NHTSA keeps track of all Recalls and Manufacturers Communications (TSB’s), and it’s free to anyone. https://www.nhtsa.gov/vehicle/2020/JEEP/GLADIATOR/PU%25252FCC/4WD#manufacturerCommunications

My dealer (Troiano CJDR- Colchester CT) has always rotated my 5th wheel (315/70R17) on my JKUR via Jeep Waves program, never a question. And any dealer with common sense doesn’t lift the Jeep more than enough to take pressure off the tires to remove them, two guys to lift the rotated spare into...

Very interesting…..so is that a case of Mag saying “this is what our setup is capable of”? and Edelbrock saying “this is the setup we are giving you”? Obviously I ask because the Mag is posting 370rw with the Edel posting 330rw….then again every single dyno write up / video / blog post I’ve...

Yeah the Edelbrock seemed like a logical choice given the company’s reputation and the small amount of reviews / feedback I’ve received. Obviously the issue their as you pointed out is the smaller blower, but it looks to be about a “claimed” 40 or so rwhp difference (less than Mag). I’m having...

Same boat (I really want this!) Don’t mind the mechanical install, but just need a reputable tuning shop I can rely on. At first I thought I wanted a centri but damn @KurtP makes too much sense with getting max HP/TQ in the RPM range where I actually spend 99% of my time. Actually I just want a...

Shit for $1100 I dont see how you could turn that down, from you’re profile I’m assuming DFW means you’re in Texas?!? I’m in CT, they are shooting at least 50% more if not double for the same work…

I was teetering with the idea of getting It done, should have just did It on day one, now the amount of paint correction is gonna make the outrageous cost even more cost prohibitive. The Mojave looks great by the way… was also looking Into undercoatings as well…also expensive..,