Search results

Dropped off my wife’s Bronco Sport due to a tranny issue, then picked up a pallet of bricks for a buddy of mine on the way back. bonus photo of a trunk or treat.

I live in Iowa and have the factory Sailcloth material soft top. I’ve had the truck in Iowa for three years and have had no issues. I wouldn’t let snow stay on the soft top to avoid stretching it, but it should be fine if it’s just a fresh snowfall over night and removed the next morning. The...

My Jeep is the base sport, so it did not come with an option for the 115V bed outlet. If you didn’t/couldn’t opt for it in the factory, there is no connector to find; it’s not in the wiring harness. I ended up installing my own inverter and a continuous solenoid, modified the connector circuit...

Wanted to post some updates on my gladiator I did recently. I put in some nice 7in Koito headlights a while back. With the 7in lights, I can fit some retro mesh stone guards. I bought some from a British sports car site, painted them black and installed them. Of course it messes up the...

There is some room to install the switch. I installed my redarc brake controller switch there. Gotta be careful installing it as it’s a very tight fit, and it requires a 90 degree Ethernet cable. I don’t hit it often with my knee, but sometimes. It’s a nice spot for it though.

I’m following up on this for anyone who may have this issue in the future. Late last December, the flickering in the parking lights got to be so bad that it was constantly flickering while driving. Not only was it flickering while driving, they would turn on and off while the truck was parked...

My 2021 Gladiator base sport has had an annoying but minor electrical issue that popped up in winter of 2022. The parking/panel lights will flicker on and off (even when the truck is off and parked). It’s now become a frequent daily occurrence. I’m going to replace the headlight switch to see if...

Following up on this. I still have not resolved this issue. I’m hoping someone smarter than me can help me out. I unhooked everything I installed, and the lights still flicker. It’s about a daily occurrence now. It’s not impacting anything except a real annoyance when I’m driving down the road...

I purchased a 54”-60” Great Day universal gun rack. I cut the ends off so the bar was 48” total in length. Then I measured and tapped two M6x1.00mm holes to be 40.5” apart on the bar. so that they will mount in factory made slotted holes on the plastic rear shroud for the soft top. It mounted...

I bought a JK light bar, and installed two Hella 450 amber fog lights (and a 550 driving light). The fog light beam is a nice rectangle spread, which is ideal for cutting through fog and snow. They’re hooked up to my aux switches. You will need shim stock if you go with a JK light bar.

The trailer came off the ball while unloading a vehicle. I wish it hit the bumper, that would be easier to replace.

Reaching out to my fellow Billet Silver owners. I damaged my tailgate and am heartbroken. If anyone has a tailgate they do not need, I will buy it. Bonus points for a spray in bedliner.

Looking for a tailgate after having an unfortunate encounter. Ideally a billet silver tailgate with factory bed liner.

My base sport max tow Gladiator got in a fight with a Toyota Tacoma a couple months ago when an old lady backed into my truck (my Jeep won). Only damage was some scratches to my bumper. The front tow hook ripped off the Tacoma’s rear bumper. I ended up buying a used plastic Rubicon bumper for...

Wanted to follow up on this as it’s been two weeks since I had the dealer look at it. I requested they look at the grounds that was involved with the fuel tank replacement. They found g911a had movement. They also stated after that, they weren’t going to diagnose anymore until I had all my...

I read that the fuse box could contribute. I have only pressed fuses back in, but that’s also something I can look further into. I will put it on my list to investigate!

When I manually turn the lights on at night, I don’t see any flickering from dim to bright. And to my knowledge, the lights do not turn on when using wiper operations or any other switches. I am curious as to what the fix was for that - did you need to place the entire wiper/turn signal module?

The only other things I have added for lights is fog lights and spot lights to the aux switches. I also added a 12volt adapter harness to the cigarette lighter and a switch for an inverter. That’s the only other thing that I could think that may be causing issues. I was going to look into that...

Same response as above, this is a base sport, there is no sensors for lights.

I don’t think the base has any sensor for lights. The switch is only off, parking lights, headlights.