Search results

I can not remember. Does the front drive shaft freely turn if parked in 2 hi. I thought it did, but I was checking things over after the oil change and my front driveshaft will not turn. Pulled the fad to make sure the collar was in the ring, which it was and it was in the disconnect state...

Here is what 3W is doing. 3W is sponsoring 3 sets of mats for you to host and pick the winners before Black Friday, helping truck owners protect their rides for the winter. Winner announcement is on November 27th—we’ll select 3 winners to receive mats. If you already have 3W mats or another...

Thought you all might like to see what these Yukon gears with roughly 60,000 miles on them over the 4 years they have been installed looked like. Started to get a whine from the rear end. Whine had been there for a bit and finally got into my guy that does my gear installs, he has probably done...

This has just started a few months ago. On every ignition start I get a notice on the display "Subscription updating" it comes up for a few seconds, disappears for a few seconds then pops backup for a few seconds, then never shows again until I start the Jeep backup. This is only while using...

Never noticed this before. Anybody else have this, looks like a clear protective tape running along the inner seam of the drivers side top panel that sits and seals on the passengers panel. When I first noticed it, I thought it was developing a crack. Never noticed it before, but I do not...

its been a couple years since buying tires. Last time was through Discount tire. bought the tires through them and had them mount and balance. Total did not seem to bad. somewhere around $1200 to $1600 I think. This time I bought tires from Northridge 4x4 called up Discount tire and to...

Well, going to give the Milestar X/T's a try. I have run a couple sets of the M/T's and really like how they do but I have come to the realization that I unfortunately spend 99% of my time on asphalt, only getting to Moab and Colorado each once a year. So, just need to get them mounted up and...

Rock Krawlers 2.25 RRD shocks for 3" lift. Fit Jeep Gladiator. Installed in May 2020. In May of 2023 I had them serviced and the IFP conversion done on them. Stating in good condition as they are faded a bit and have a few scratches on them, otherwise they are perfect shocks. $600 $500 $400 obo...

Anybody see this video yet? I have no validity to the info but just saw the video.

If you where to be buying new shocks which would you go for Bilstein 8100 smooth bodies or Falcon 3.3's. My issue with the Bilstein's is the condition of the body in a short time for that price of a shock. I have heard both good and bad about the Falcons. Some say they are to stiff and others...

Used ACM ARB single compressor mount for under the master cylinder with heat shield. Fits JT / JL. Mount, heat shield and hardware. $40 shipped.

Now maybe I can hear when someone is talking. Hopefully stop the, repeat last, all the time. Still need to finish running the speaker wire to the unit. It is under the passenger seat. Dang, I need to clean the speaker bar!

Thinking of getting a set of the Falcon 3.3's to replace my RK 2.25 RRD's. Anybody run these shocks with an RK 3" lift? How do you like them regardless of lift make. Seems to be a wide range from like to dislike but not seeing to many Gladiator responses.

Not finding an answer anywhere. I am going to mount a twin ARB under the drivers seat and then run the supply line out to under the hood. For that length of a run do I need to run a larger hose than the standard 1/4" or JIC-04 hose?

Did a large multiple search and not seeing what I want. I currently have a single ARB under the master cylinder. It works, but takes 14 minutes to fill the tires from 15psi to 35psi using a 4 tire system. Looking to do a ARB twin but can not decide on where to mount it. Can not use the Grimm as...

Rock Krawler Pro X steering under mount drag link for 2018 to present JT/ JL with wide track axles. 1.75" diameter solid aluminum with rebuildable joints. Can be converted to top mount by buying top mount kit from Rock Krawler. I can not get it to play nice with my hydro steer in its current...

Anyone know if the Steer Smart drag link mimics the angles of the stock drag link? Does it sweep out like the stock drag link?

Wow, did not realize that these axles throw so much grease! Hopefully it is just a "new thing" and it will slow down. For the price of them I would think they would scrape better with that fancy orange bell that is dang near impossible to push on. Rant over.

Who has had a Z Automotive front trail cam installed for a year or more and how do you like it and how is it doing? Plus are the new ones the same camera as I thought I saw something about a different supplier and not being as good.

Anybody else getting a virus alert from Mcafee while viewing the site? I have run a couple scans and nothing is showing up.