In your case, it very well may be the DASM needs an update and possibly recal'd. Has the DASM ever been updated since you bought the vehicle? From my understanding, jeep added the auto highbeams near the end of 2019. I updated my 8.4 uconnect to software version 39.6 today, no help. I...
I'm considering other possibilities now, the dasm is set up properly, with the latest firmware. The PCM and ABS is up-to-date. My vehicle is a 2019 Jeep Wrangler Sport. It had 0 options on it except the 3.6 motor. The radio was the delphi 4 inch base, no Satellite, no NAV. I have an...
Yep. But when I was visiting for the first time, I saw that dismal answer and gave up then. I have become addicted to making retrofits and happened onto it again and decided to respond just in case someone else sees the post and decides to not pursue because somebody isn’t making the harnesses...
I thought I was done, well, actually with the ACC install I'm done. Auto high beams I thought would be just a simple act of enabling the auto highbeams in the bcm. Nope, didn't do it. Its in my radio for the setting, but setting it just clears a few seconds later. I have my jeep updated to...
Ok. Finally had some free time from work. Found the diagram for the defogger/defroster de-icer cirucit for this retrofit. So its a matter of getting the connectors and adding the wiring. This will complete my install of the ACC/DASM system in a WRANGLER JL (i'm quite sure the Gladiator will...
Mine is a manual, so a paddle shifter will do nothing, well, it would look cool :P. Ok, Got the correct part numbers for the jeep, on the abs pump and its associated controller, and once I initialized it, it is now working. So you can use USED parts, just need to make sure the abs pump and its...
Since Jimmy's last post, we have discovered you can use a "used" DASM. AS for the ABS pump, I'm struggling with part numbers in trying to find one used that will work. My 2nd one is on the way, but counting the first goof ($75 for the ABS pump), all total, I'm in for about $145 for the DASM...
The DASM took calibration but yea, it may be the DASM that has the problem :( I'm betting (or at least hoping) its just the abs module is from an NON FCW vehicle or actually a defective one. the error says its a bad abs module. I can only hope thats the problem.
I verified all the wiring...
I made a few changes, from your list above, and now its complaining about the abs module. the 2 errors I get now are:
C2227-00 abs disabled ecu - active Adaptive Cruise Control
C2227-00 abs disabled ecu - active Drivers Assistance System
There are NO errors in the ABS module. I've...
Ok, i got the DASM programmed, however, I'm getting 2 errors that I cannot clear:
1. Under the Adaptive Cruise Control, I'm getting vehicle configuration missmatch - active Adaptive Cruise Control
2. Under Drivers Asstance Sytem, I'm getting vehicle configuration missmatch - active...
You can probably make a few dollars by buying used DASM modules, putting them in plant mode, and selling on ebay, or in these forums. I think you could make around $300-$500 per module doing this. I've been thinking about getting a witech2 but the initial cost is crazy. Dealers aren't too...
I can loan you my obd m500 odometer programmer. You give me an address plus $400, and I’ll send it to you. Once you’re done, you can keep it, or send back to me. If I get it back and it still works, I’ll give you back $350 minus shipping costs of sending it to you.
Not sure why you pulled out the old conspiracy thing. Not sure how that would apply.
its capitalism. I worked for companies that did the same thing. They said they were protecting their propriety rights. Well, yea, they were. Nobody is stealing their rights. Reusing parts is good for...