Search results

Can someone with the rail system provide me with a couple of dimensions? Depth: Height: Slot opening height:

I emailed Daystar and they said that the 2” kit is 2” in front and 1.5” in the back. I was looking to lift the front 2” but the back only a little, like .75” to keep it from being too high in the front and close to level. Don’t really want to buy the 2” kit and the rear .75” kit. May just go...

I have seen varying information on the height of the rear spaces for the Daystar 2" kit. Is it 1" in the rear, and what have people seen as far as how close to level it sets with the rear installed?

I bought a set of ratchet straps off amazon and they came with 4-18” loop straps. Wrapped these around the rear grab handles and they hang down low enough for the kiddos to grab them and pull themselves up.

Would the panel system you have out be able to mount to a DIY 7/8x1-5/8 strut rail system, or an L-track system? Thanks

Day fishing trip with an buddy and our oldest kids who had the day off from school. Detour up the easy side of Signal Peak on the way home

Got it dirty and tested out the 4wd and off road features on a hunting trip. No luck on the hunt, but a lot of fun getting it off the pavement.

Interested

So I just found these, which would work on the molle system on the back of the seats: https://alldayruckoff.com/store/gear/front-quick-carry-handle-standard/ They also have these that when pairs with some carabiners would work too with more color options...

I am looking into this as well. The Rubicon seat backs have molle straps, I am trying to find something that could attach the the molle system. Would want something that ran vertical on the bottom outside molle points. Anyone know of anything?

I just installed the rail, no drill required. Use a small drill bit and spin it by hand to make an indention for the screws to set into, then you should be able to put the screws in with turning and a little bit of pressure. I used a PH2 bit in a 1/4" socket to turn the screws in the tight...

Which antenna did you go with, and any noticeable difference in reception?

Shade screen looks great! Going to put on my list for my ordered Gladiator. I looked at their website and it says this stays on with the hard top, but I dont see how you access the freedom top latches. Is there openings? How does that work?