Search results

I almost bought that one as well. However, after a couple of trips to the local store and reading on the box that these winches (vs. hoist) are not recommended for vertical load holding I went with the hoist. Now, having said this I've seen them used in several of these applications, so maybe...

Cajundoc, I looked at about 50 examples of different lift methods that people have put together. Several used the boat crank that you show along with every imaginable form of powered winch. I ended up with a solution that best fit my needs and garage space. There is no wrong way to do this.

Not a question I expected to ever hear on this forum :)

While it works well like I have it now, if I were to do it again I would either get two of these 4-wheel trolleys or 2 of the 2-wheel trolleys and space them out more to better balance the load. The balance part was a little trial and error. I first set it up so that the hoist was balanced...

Absolutely love mine! I had or have the P-300 misfire CEL code as well as a leaking back window that had to be replaced. Before it had 1000miles it was in the shop 4 times for almost 3 weeks. Most of this time was for the CEL issue. After having a regional FCA engineer look at the truck, it...

I used the following trolley from Amazon that is made to fit the Unistrut... https://smile.amazon.com/gp/product/B07S38FMND/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 Then used 2 sections of angle iron to mount the hoist to the trolley. Got this idea from HF hoist reviews. I was...

Very nice. We've raised our kids here and all went through GISD.

We were practically neighbors. We live on the north side of Garland in the Firewheel area.

DaleG, thank you very much for the detailed instructions and measurements. I used your design with a couple of mods for my application and had it working last week. I ended up using the HF 440lb hoist mentioned above and mounted it an a trolley using a section of Unistrut. This allows me to...

Those tires look great. What is the actual measured height?

Thanks again for the flexibility in meeting when driving through Denver last week.

Update: Dropped off at dealership this morning for the 2nd time. Thanks to this thread I requested they look at the compression in cylinders 2,4,6. They will submit an inquiry to STARS? and said they have dealt with one other truck with the same issue. Hopefully this means I've skipped...

Date of Mfg: 11-19 MDH: 111822 505AA Mileage when it first occurred: 461 miles How many times has it occurred: 2 What exact codes did it throw: P0300 Is the issue on going? Yes If so, what has been done to try to solve the issue? First visit "cleared code and test drove vehicle. Light did not...

Flew to Houston yesterday and picked mine up. Loved the drive back to Dallas to get to know her a little better. Have enjoyed getting to know this community a little better over the past month before pulling the trigger.

Looking to replace the stock spare wheel. Prefer the AT tire. Located in Garland. Thanks