Sponsored

Search results

  1. Flush Mount Tail Lights

    Swap the lamps side to side and see if the problem follows the lamp. The plugs are the same.

  2. Flush Mount Tail Lights

    Rechecked the wiring and all is good. There's no voltage going to the reverse light circuit on the passenger side. Going to let everything go to sleep and retest.

  3. Flush Mount Tail Lights

    Hold that thought. L side reverse working and R side not. Stay tuned

  4. Flush Mount Tail Lights

    While I was at it I removed the sensor wiring as I don't have that option. Works as it should now.

  5. Flush Mount Tail Lights

    For those of you with inoperative back up when replacing halogen units lights there is a fix. You have to be comfortable doing custom wiring which i am. To test, I just rigged the wiring by back probing the connector. The circuit needs a load to stay on so get a couple resistors and wire them...

  6. Flush Mount Tail Lights

    Mine was the opposite. Both fit fine now.

  7. Flush Mount Tail Lights

    I have factory halogens. Everything works but the back up lights.

  8. Flush Mount Tail Lights

    After installing mine, the passenger side had a big gap at the front bottom like everyone else complained about. To fix it just remove the light, take the heel of your hand and apply inward pressure on the sheet metal where the alignment pin holes are. This will bring the bottom of the housing...

  9. Flush Mount Tail Lights

    Thanks. I dont.

  10. Flush Mount Tail Lights

    Whats the second plug for?

  11. 6,500 miles oil life still 32%

    My oil life indicator drops about 1% every 100 miles. I normally change mine every 7000 miles and there's roughly 30% left.

  12. Flush Mount Tail Lights

    That makes more sense.

  13. Flush Mount Tail Lights

    So the led's draw more than the halogens? Thats hard to believe.

  14. Flush Mount Tail Lights

    Correct. Used aux 4 and set the switch to battery so that the key doesn't necessarily need to be on for me to use them.

  15. Flush Mount Tail Lights

    Thats how I wired mine. Only use when necessary.

  16. Flush Mount Tail Lights

    Well, just got shipping notice on mine. Let the fun begin!

  17. Flush Mount Tail Lights

    Sounds like a bad mold as everyone that is having a fitment issue complains about the same side not fitting properly.

  18. Flush Mount Tail Lights

    Try putting it back to halogen and see what happens

  19. Flush Mount Tail Lights

    My thought is that the TIPM doesn't see the proper draw on that circuit and shuts the driver off.

  20. Flush Mount Tail Lights





Top