Search results

It's bolt on, did the same thing on a Mojave and on a JK. On both vehicles I used EVO's air option so I could do it with the push of a button but at any speed as I pleased.

I really hope there is more development in this area. I definitely think this light has a place as it looks more factory and all. There have been many times where I've been out over landing and had to get wipers at auto parts stores due to trees breaking them or failing with heavy dirt which...

Great looking light bar, but most might be with me on this. Definitely not wanting to drill my windshield frame nor do I want to have to buy special wiper blades that I can't get at any auto parts store.

2021 JLUR 6MT with 8k miles. Currently no recall done. Haven't experienced any issues or problems with the clutch the Jeep came with. Due to the horror stories and lack of competent mechanics at local dealers to me I'll keep it the way it came and if I come across any issues I'll like just...

Well I no longer have the JT but they were a great tire for me. Most of my driving was just commuting to work and back with a few overland trips a year with nothing too crazy. The fact they are a little lighter and smaller than others was perfect since I didn't want to regear yet. I have these...

2"AEV lift, 37" K02's

Our 16 is my favorite! Better than everything else! Haha

2016 JK with 40k miles. Mostly all hard off-road miles. Zero issues to date. 2023 Mojave, 15k miles, zero issues to date 2021 JLUR Manual, 5k miles, zero issues to date 2023 392 XR, 5k miles, zero issues to date. All pleased here with no issues to report. Although I'm partial to the JK as it...

2nd this! I have a 23 Mojave and did the Rubicon sway bar with air. Works at any speed as I please when I want without leaving the drivers seat. Used an end link with a hiem joint for better flexibility of the link. Pretty much the best option in my opinion. Also run the same setup on our JK...

They will most likely "fit" but will be loose in areas. The Mojave and 392 JL have bigger bolsters than the other models.

I don't have seat covers on your specific model, but I do have Bartact covers on other vehicles and they have served me great. I know they aren't super cheap but they are the only ones I'll buy for our off-road vehicles.

On the Rubicon sway bar itself there's a little bar that goes into the rubber grommet that looks like an exhaust hanger. All I had to do is get my grinder and sand the corner of it down a hair and that was it. Everything else fit perfectly.

I did a little Google searching and didn't come up with much, but does anyone know if there's a company that makes a cap (ex. Smart cap/Alucab, something not fiberglass) for the Motobilt bobbed bed?

Yes I plugged the hole in the rear and drilled a hole in the side with a rubber grommet to reroute. With this bumper the 12k Badlands winch is very tight. It sits tight against the grill and it's tight on the bumper skin. Everything does work and fits just tight. I'm not a huge fan of this...

New RR Arcus bumper and Badlands 12k winch.

I live in NE Ohio, and I have my truck done with Krown which is same as lanolin oil/fluid film once a year in October. Film works great and zero rust issues. Truck looks like new underneath. We do this with all our vehicles we drive year round and very pleased.

I have ran beadlocks on our JK for years now and have done many miles of road driving and no issues. But yes as stated above there's definitely maintenance with them. It's nice to be able to mount a tires yourself than pay a shop. But tightening the bolts to a specific spec (based on...

I believe to have it like the OE came with, this is the kit you need. There are other switch systems out there that are better for similar cost FYI. I have the SPOD and it's a little bit more but very versatile and has 8 circuits with ability to add more and it's a cleaner look under the hood...

Depending how set you are with 18" wheels, 17" wheels will give you a much larger selection of tires.

Interested in selling individual parts?